Overview

420 stainless steel, known as S42000, is a martensitic, hardenable alloy that stands out for its enhanced strength and hardness compared to other stainless steels like 410 and 416. It contains at least 12% chromium for corrosion resistance and higher carbon content, which increases its wear resistance and allows it to achieve a Rockwell hardness of up to 50 HRC after heat treatment. This steel exhibits good ductility in the annealed condition, but its machinability decreases once hardened beyond 30 HRC. Despite its good corrosion resistance, especially when hardened and polished, it is not as resistant as common austenitic grades and is limited by a loss of ductility at sub-zero temperatures and a loss of strength at elevated temperatures due to over-tempering. Common applications include bushings, dental and surgical instruments, pump parts, valve components, and shafts. It is not recommended for use above tempering temperatures due to a reduction in mechanical properties, and welding is possible with the right techniques .

General Properties

420 stainless steel is a high-carbon martensitic grade that offers a balance of hardness and corrosion resistance. It is known for its high hardness, wear resistance, and moderate corrosion resistance. The steel's composition includes carbon (C: 0.15-0.40%), chromium (Cr: 12.0-14.0%), and other elements in smaller amounts such as manganese (Mn), silicon (Si), phosphorus (P), and sulfur (S) .

응용 프로그램

420 stainless steel is used in a variety of applications where strength and durability are essential, such as in cutlery, surgical instruments, and tools. It is also used in precision machinery, bearings, electrical equipment, instruments, transportation vehicles, household appliances, and food utensils.

부식 저항성:
While 420 stainless steel provides good corrosion resistance, especially when hardened and polished, it is not as resistant as common austenitic grades. Its corrosion resistance is compromised at sub-zero temperatures and at elevated temperatures due to over-tempering .

내열성:
The useful operating range of 420 stainless steel is limited by its loss of ductility at sub-zero temperatures and loss of strength at elevated temperatures due to over-tempering .

가공성:

420 stainless steel is relatively easy to machine in the annealed condition, but machining becomes more difficult once hardened to above 30 HRC .

용접:

Welding is not common for this alloy due to its hardening properties, but it is possible with the right techniques and post-weld heat treatment to prevent cracking .

뜨거운 작업:

Hot working of 420 stainless steel can improve its toughness and wear resistance .

냉간 가공:

Cold working can increase the steel's hardness and strength while also improving its surface quality and dimensional accuracy .

가열 냉각:

Annealing is used to soften the steel, improve machinability, and prepare it for further heat treatment processes .

Tempering:

Tempering is used to reduce brittleness and internal stresses after hardening .

경화:

420 stainless steel can be hardened to achieve high hardness levels through a process of heating and rapid cooling (quenching) .