- 재료 ➔
- 마치다 ➔
- 색상 및 질감 코일 ➔
- 구조용 강철 부품 ➔
- 건축 금속 제품 ➔
← Back to Categories
Hammered bronze metal stainless steel sheet in matte or mirror finish, warm-to-weathered bronze tones, PVD coated. Grades 201, 304, 316.
Hammered bronze metal stainless steel sheet carries a dimpled, hand-struck texture pressed into the surface — an irregular pattern of shallow indentations that catches light differently from every angle. Combined with the warm bronze PVD tone, the result reads as handcrafted rather than machine-flat: the kind of surface that hides fingerprints and light scratching by design, since the texture itself breaks up reflection and wear marks.
For the full process breakdown and answers to common questions about hammered stainless steel, see our Hammered Sheets page →.
Two base options: a lightly ground matte base for a low-glare surface, or a mirror-polished base for a reflective surface where light catches in each hammered dimple. Color range spans Classic Bronze, Amber Bronze, Slate Bronze, and Bronze Gold, applied via water plating or PVD coating. Color depth varies slightly by batch.
Hammered bronze sheet is specified for feature walls, elevator interiors, column cladding, and furniture panels where a handcrafted, tactile surface is part of the design brief — as well as high-traffic surfaces where hiding scratches and dents matters as much as the look. As a direct supplier working straight with the mill, we support both coil and cut-sheet orders with no MOQ, so you can order sample quantities before committing to a full run.
Contact our technical engineering team for samples, project pricing, or custom fabrication consultations.
스테인리스 스틸 소재에 깊이 뿌리내리고 있습니다. 10년 이상 코일, 시트, 프로파일 및 마감재에 집중해 온 당사는 원료부터 등급 선정, 표면 일관성 및 배치 안정성을 관리합니다.
자재 품질은 원산지에서부터 시작됩니다.
저희는 포산에 있는 검증된 제분소 및 가공업체와 협력하여 프로젝트 전반에 걸쳐 추적 가능한 공급, 일관된 화학 성분 및 안정적인 성능을 보장합니다.
소재에 대한 이해를 바탕으로 한 엔지니어링 지원.
저희 엔지니어들은 도면과 사양서를 검토하여 선택된 재료로 프로파일과 구성 요소를 제조할 수 있는지 확인합니다.
파편화된 아웃소싱이 아닌, 통합적인 처리 방식.
자재 가공, 제작 및 마감은 명시된 사양대로 제품을 납품하고 설치할 수 있도록 조정됩니다.
Base coils come from our TOP partner mills (Lisco, Tisco, Jisco, Posco PZSS, Yongjin, Hongwang) before undergoing surface finishing and coating in-house at our Foshan facility.
Every sheet and coil ships with protective PVC film from Polifilm (Germany) and Novacel (France). Adhesion level is matched to your downstream process — strong enough to stay in place through laser cutting or stamping without gas pressure lifting the film and causing edge blowout, but not so strong that it leaves residue when removed.
Seaworthy packaging using sturdy wooden crates or steel frames to ensure 100% surface perfection upon arrival. Exporting directly to North America, Europe, Middle East, and Southeast Asia.
