블랙 새틴 스테인리스 스틸 — 블랙 새틴 스테인리스 스틸 마감 또는 블랙 새틴 메탈이라고도 불리는 — 은 헤어라인과 미러 사이에 위치합니다. 헤어라인보다 더 부드럽고 덜 선형적인 미세하고 낮은 방향성의 결이 있으며, 미러 마감의 반사 깊이는 없습니다. 결과적으로 눈에 보이는 결 무늬나 유리와 같은 반사가 아닌, 미묘한 질감을 가진 부드러운 반광 블랙 금속 표면이 됩니다.

블랙 새틴은 낮은 광택의 반광 표면으로 거울보다 지문과 가벼운 긁힘을 더 잘 가려주며, 헤어라인보다 더 부드럽고 덜 질감 있게 읽을 수 있습니다. 이는 헤어라인의 눈에 보이는 결이나 거울의 높은 유지 관리 광택보다 은은한 광택이 디자인에 더 잘 어울리는 가구 전면, 설비 및 하드웨어와 같이 세련된 블랙 새틴 금속 표면을 원하는 프로젝트에 일반적인 중간 선택입니다.

Achieved through chromium-carbide PVD coating, offering low friction and superior corrosion resistance. Under strong or direct light, the surface reveals a subtle green-yellow undertone, distinguishing it from the other black finishes. Fully compliant with RoHS environmental standards as an eco-friendly replacement for hexavalent chromium plating.

Low friction coefficient, RoHS compliant, high corrosion resistance.

Humid interiors, luxury bathware, high-end facade cladding.

Utilizes a Titanium Aluminum Nitride film to achieve high surface hardness and strong thermal stability. Under strong or direct light, the surface reveals a subtle purple undertone — a signature trait of Ti-black that sets it apart from other PVD blacks.

Extreme scratch hardness, thermal stability, distinct purple-black depth.

High-traffic elevator cabins, entrance portals, push plates.

A carbon-based PVD coating that produces a neutral, carbon-gray black — cooler and more understated than titanium black's purple depth. Holds its tone consistently under both ambient and direct light, making it a versatile choice where a true neutral black is preferred over a colored undertone.

Neutral carbon-gray tone, consistent under varied lighting, high durability.

Minimalist facades, equipment housings, hardware and fixtures where a true neutral black is required.

A traditional wet-chemical oxidation process that yields a flat, solid black with no visible undertone shift — unlike the PVD blacks above, its tone stays uniform regardless of lighting. Highly cost-effective for large-scale architectural projects that prioritize budget over the subtle tonal variation of PVD coloring.

Maximum black saturation, deep pitch-black depth, budget friendly.

Budget-conscious projects requiring absolute black intensity.

Base coils come from our TOP partner mills (Lisco, Tisco, Jisco, Posco PZSS, Yongjin, Hongwang) before undergoing surface finishing and coating in-house at our Foshan facility. 

Every sheet and coil ships with protective PVC film from Polifilm (Germany) and Novacel (France). Adhesion level is matched to your downstream process — strong enough to stay in place through laser cutting or stamping without gas pressure lifting the film and causing edge blowout, but not so strong that it leaves residue when removed.

Seaworthy packaging using sturdy wooden crates or steel frames to ensure 100% surface perfection upon arrival. Exporting directly to North America, Europe, Middle East, and Southeast Asia.