• 마치다 ➔
  • 재료 ➔
  • 구조용 강철 부품 ➔
  • 건축 금속 제품 ➔
← 카테고리로 돌아가기

304 PVD Black Titanium Hairline Stainless Steel Sheets for US Speaker Back Panels

저희 프로젝트에 대해 말씀드리겠습니다.이 경우 제품은
A US audio brand sourced color-matched 304 PVD Black Titanium Hairline stainless steel sheets from Sanmei Metal for the back panels of its premium speakers.
위치
미국
재료
304 스테인리스 스틸
마치다
PVD Black Titanium, hairline
애플리케이션
Speaker back panels
black stainless steel speaker back panel
Concept rendering: PVD Black Titanium Hairline stainless steel speaker back panel.

프로젝트 개요

A US audio brand needed black stainless steel back panels for a premium speaker line. The brand already had an established supply chain in the US, but needed a black finish that matched its existing reference sample exactly.
The 400 × 500 mm panels are laser cut and bent in the client's own facility, so the sheets also had to arrive ready for fabrication, with a decorative surface that would come through cutting and bending undamaged.

주문 사양

등급
304 스테인리스 스틸
마치다
PVD Black Titanium, hairline, color-matched to client sample
베이스 마감
S26HL-11, tuned to the reference sample
Sheet size
1.5 × 1219 × 1524 mm (approx. 0.059" × 48" × 60")
Finished part
400 × 500 mm back panels, laser cut and bent by the client
보호 필름
[FILM BRAND + THICKNESS] laser-cutting film

Matching a Black Reference Sample

In premium audio, the back panel is part of the product's identity. "Black" covers a wide range of tones, and a slight shift in undertone or sheen shows immediately when a panel sits next to the rest of the product. The client sent its physical reference sample to Sanmei Metal for matching.
Two steps to an exact match

Start from a standard finish.

Sanmei Metal produces several blacks in-house: PVD Ti-Black, PVD Gun Black, PVD Chrome Black and water-plated black. Compared side by side with the client's sample, our PVD Black Titanium Hairline sheet (S26HL-11) was the closest.

Tune the coating.

Using S26HL-11 as the base, our PVD technicians adjusted the coating time and reactive gas ratio until the color, undertone and sheen matched the reference sample.
Our black hairline finishes
Each finish has a different undertone under strong light. Open any swatch to view details or request a sample.
PVD 블랙 티타늄 헤어라인 스테인리스 스틸 시트 S26HL-11
Used in this case

Titanium Black S26HL-11

Purple cast
자세히 보기
크롬 블랙 헤어라인 스테인리스 스틸 시트 S26HL-24

Chrome Black S26HL-24

Green-yellow cast
자세히 보기
건 블랙 헤어라인 스테인리스 스틸 시트 S26HL-12

Gun Black S26HL-12

Neutral carbon gray
자세히 보기
Water-Plated Black Hairline Stainless Steel Sheet S26HL-14

Water-Plated Black S26HL-14

Flat, solid black
자세히 보기
Starting from a stock finish rather than a blank color makes the match repeatable for every reorder.
Send us your color sampleExplore our black stainless steel

Batch-to-Batch Consistency

Premium audio brands rarely start with a large order. A small trial batch to confirm the color and test market response is a normal first step, and reorders follow once the product sells.
That makes color consistency between batches a brand-image issue: every reorder has to match the panels already on the market. Before each shipment, Sanmei Metal checks the sheets with a colorimeter against the client's approved sample, so every sheet in every batch has the color the client signed off.
Start with a test batch
산메이 금속의 LAB 모비토링
Every batch is checked with a colorimeter against the client's approved sample.

Ready for Laser Cutting and Bending

The client cuts each 1219 × 1524 mm sheet into 400 × 500 mm panels and bends them in its own facility. Standard protective films can lift, bubble or tear back along the cut line, leaving the coated edge unprotected.
산메이 금속 적용
폴리필름 laser-cutting film, which stays bonded through cutting so the PVD surface remains covered right up to the edge, and the coated surface bends cleanly at the fold lines without cracking.
Laser cutting, bending, deep forming and long storage each call for a different film. Tell us how your panels will be processed and we will recommend a suitable one.
귀하의 프로세스를 설명해 주세요.보호 필름 상세 정보

프로젝트 개요

Sending a physical sample is the most reliable way to make sure bulk production matches what you expect. Lighting and screens change how a color looks, so the black a supplier sees and the black a client has in mind are often not the same.

For this project, Sanmei Metal custom-tuned a standard finish to the client’s sample, and supplied a material grade and protective film suited to the client’s own laser cutting and bending.

Choosing stainless steel for speaker parts is not difficult. The details are: a thickness that keeps the panel light without losing rigidity, a color that fits the brand’s positioning, and a grade suited to how the product is made and used.
저희 프로젝트에 대해 말씀드리겠습니다.이 경우 제품은
이 경우 제품은

PVD Black Titanium Hairline Stainless Steel Sheet

The back panels in this case were made from our PVD Black Titanium Hairline sheet (S26HL-11), color-tuned to the client's reference sample and supplied with laser-cutting film.
Product code
S26HL-11
이 경우 등급
304
마치다
PVD Black Titanium, hairline
이 경우 크기는
1.5 × 1219 × 1524 mm
View black sheets견적 받기
다음 프로젝트: 없음

당신은 또한 좋아할지도 모릅니다

더 보기+

문의하기

중국 광둥성 포산시 순더구 크리에이팅 센터, 우편번호 528315
+8615015653566 / 0757-87668353
페이지 덩
마케팅@sanmeimetal.com

    파일이나 사진을 여기에 드래그하세요 (선택 사항).

    또는 먹다

    JPG/ PNG/ DWG / PDF / DOCX / ZIP (최대 20MB)

    전화: +8615015653566 / 0757-87668353
    이메일: 마케팅@sanmeimetal.com

    본부:
    중국 광둥성 포산시 순더구 러총진 위허로 142호 창작센터 528315

    공장: 중국 광둥성 포산시 순더구 천춘진 리위안 물류도시 528313

    견적 받기

    필요한 모든 사이즈와 각 사이즈별 마감, 수량을 기재해 주세요. 소량 주문도 환영합니다. 이메일로 곧 답변드리겠습니다. marketing@sanmeimetal.com으로 문의하셔도 됩니다.

    크기, 마감 및 수량 항목당 한 줄씩

      아직 양식을 작성할 준비가 안 되셨나요? 저희에게 연락하는 다른 방법

      십자가

      언어

      문의하기
      1
      안녕하세요! 어떤 스테인리스 스틸 제품이나 마감에 관심이 있으신지 알려주세요. 또는 샘플을 원하시는지 알려주시면 곧 연락드리겠습니다.