304 PVD Black Titanium Hairline Stainless Steel Sheets for US Speaker Back Panels

Расскажите о вашем проекте Товары в данном случае

A US audio brand sourced color-matched 304 PVD Black Titanium Hairline stainless steel sheets from Sanmei Metal for the back panels of its premium speakers.

Расположение

Соединенные Штаты

Материал

нержавеющая сталь 304

Заканчивать

PVD Black Titanium, hairline

Приложение

Speaker back panels

Визуализация Обзор Соответствие цвета Последовательность Laser-ready film Краткое содержание Сопутствующие товары Получить ценовое предложение

black stainless steel speaker back panel

Concept rendering: PVD Black Titanium Hairline stainless steel speaker back panel.

Обзор проекта

A US audio brand needed black stainless steel back panels for a premium speaker line. The brand already had an established supply chain in the US, but needed a black finish that matched its existing reference sample exactly.

The 400 × 500 mm panels are laser cut and bent in the client's own facility, so the sheets also had to arrive ready for fabrication, with a decorative surface that would come through cutting and bending undamaged.

Спецификация заказа

Оценка

нержавеющая сталь 304

Заканчивать

PVD Black Titanium, hairline, color-matched to client sample

Базовая отделка

S26HL-11, tuned to the reference sample

Sheet size

1.5 × 1219 × 1524 mm (approx. 0.059" × 48" × 60")

Finished part

400 × 500 mm back panels, laser cut and bent by the client

Защитная пленка

[FILM BRAND + THICKNESS] laser-cutting film

Matching a Black Reference Sample

In premium audio, the back panel is part of the product's identity. "Black" covers a wide range of tones, and a slight shift in undertone or sheen shows immediately when a panel sits next to the rest of the product. The client sent its physical reference sample to Sanmei Metal for matching.

Two steps to an exact match

Start from a standard finish.

Sanmei Metal produces several blacks in-house: PVD Ti-Black, PVD Gun Black, PVD Chrome Black and water-plated black. Compared side by side with the client's sample, our PVD Black Titanium Hairline sheet (S26HL-11) was the closest.

Tune the coating.

Using S26HL-11 as the base, our PVD technicians adjusted the coating time and reactive gas ratio until the color, undertone and sheen matched the reference sample.

Our black hairline finishes

Each finish has a different undertone under strong light. Open any swatch to view details or request a sample.

Лист нержавеющей стали S26HL-11 с PVD-покрытием из черного титана и шлифованной поверхностью

Used in this case

Титаново-черный S26HL-11

Фиолетовый оттенок

Просмотреть подробности

Лист нержавеющей стали с хромированной черной шлифовкой S26HL-24

Хром Черный S26HL-24

Зелено-желтый оттенок

Просмотреть подробности

Лист нержавеющей стали S26HL-12 с матовой поверхностью, цвет «оружейный черный»

Gun Black S26HL-12

Нейтральный углеродно-серый

Просмотреть подробности

Water-Plated Black Hairline Stainless Steel Sheet S26HL-14

Водопоглощенный черный S26HL-14

Плоский, насыщенный черный

Просмотреть подробности

Starting from a stock finish rather than a blank color makes the match repeatable for every reorder.

Send us your color sample Explore our black stainless steel

Batch-to-Batch Consistency

Premium audio brands rarely start with a large order. A small trial batch to confirm the color and test market response is a normal first step, and reorders follow once the product sells.

That makes color consistency between batches a brand-image issue: every reorder has to match the panels already on the market. Before each shipment, Sanmei Metal checks the sheets with a colorimeter against the client's approved sample, so every sheet in every batch has the color the client signed off.

Start with a test batch

Every batch is checked with a colorimeter against the client's approved sample.

Ready for Laser Cutting and Bending

The client cuts each 1219 × 1524 mm sheet into 400 × 500 mm panels and bends them in its own facility. Standard protective films can lift, bubble or tear back along the cut line, leaving the coated edge unprotected.

Sanmei Metal applied
Полифильм laser-cutting film, which stays bonded through cutting so the PVD surface remains covered right up to the edge, and the coated surface bends cleanly at the fold lines without cracking.

Laser cutting, bending, deep forming and long storage each call for a different film. Tell us how your panels will be processed and we will recommend a suitable one.

Расскажите нам о вашем процессе.Подробная информация о защитной пленке

Краткое описание проекта

Sending a physical sample is the most reliable way to make sure bulk production matches what you expect. Lighting and screens change how a color looks, so the black a supplier sees and the black a client has in mind are often not the same.

For this project, Sanmei Metal custom-tuned a standard finish to the client’s sample, and supplied a material grade and protective film suited to the client’s own laser cutting and bending.

Choosing stainless steel for speaker parts is not difficult. The details are: a thickness that keeps the panel light without losing rigidity, a color that fits the brand’s positioning, and a grade suited to how the product is made and used.

Расскажите о вашем проекте Товары в данном случае

Товары в данном случае

PVD Black Titanium Hairline Stainless Steel Sheet

The back panels in this case were made from our PVD Black Titanium Hairline sheet (S26HL-11), color-tuned to the client's reference sample and supplied with laser-cutting film.

Product code

S26HL-11

Оценка в данном случае

304

Заканчивать

PVD Black Titanium, hairline

Размер в данном случае

1.5 × 1219 × 1524 mm

View black sheets Получить ценовое предложение

Связаться с нами

Центр развития, район Шунде, город Фошань, провинция Гуандун, 528315, Китай

+8615015653566 / 0757-87668353

Пейдж Дэнг

маркетинг@sanmeimetal.com

Ресурсы мельницы Декоративные простыни Изготовление Структурные профили

Технология PVD Упаковка и съемка Блоги Проекты

ТЕЛ: +8615015653566 / 0757-87668353

Электронная почта: маркетинг@sanmeimetal.com

Штаб-квартира:
Центр создания, № 142, улица Юйхэ, город Лецун, район Шунде, город Фошань, провинция Гуандун, Китай. 528315

Фабрика: Город логистики Лиюань, город Чэньцунь, район Шунде, город Фошань, провинция Гуандун, Китай. 528313

Всё о декоративной отделке листового металла

304 PVD Black Titanium Hairline Stainless Steel Sheets for US Speaker Back Panels