• Beenden ➔
  • Materialien ➔
  • Bauteile aus Baustahl ➔
  • Architektonische Metallarbeiten ➔
← Zurück zu den Kategorien

304 PVD Black Titanium Hairline Stainless Steel Sheets for US Speaker Back Panels

Erzähl uns von deinem ProjektProdukte in diesem Fall
A US audio brand sourced color-matched 304 PVD Black Titanium Hairline stainless steel sheets from Sanmei Metal for the back panels of its premium speakers.
Standort
Vereinigte Staaten
Material
Edelstahl 304
Beenden
PVD Black Titanium, hairline
Anwendung
Speaker back panels
black stainless steel speaker back panel
Concept rendering: PVD Black Titanium Hairline stainless steel speaker back panel.

Projektübersicht

A US audio brand needed black stainless steel back panels for a premium speaker line. The brand already had an established supply chain in the US, but needed a black finish that matched its existing reference sample exactly.
The 400 × 500 mm panels are laser cut and bent in the client's own facility, so the sheets also had to arrive ready for fabrication, with a decorative surface that would come through cutting and bending undamaged.

Bestellspezifikation

Grad
Edelstahl 304
Beenden
PVD Black Titanium, hairline, color-matched to client sample
Grundierung
S26HL-11, tuned to the reference sample
Sheet size
1.5 × 1219 × 1524 mm (approx. 0.059" × 48" × 60")
Finished part
400 × 500 mm back panels, laser cut and bent by the client
Schutzfolie
[FILM BRAND + THICKNESS] laser-cutting film

Matching a Black Reference Sample

In premium audio, the back panel is part of the product's identity. "Black" covers a wide range of tones, and a slight shift in undertone or sheen shows immediately when a panel sits next to the rest of the product. The client sent its physical reference sample to Sanmei Metal for matching.
Two steps to an exact match

Start from a standard finish.

Sanmei Metal produces several blacks in-house: PVD Ti-Black, PVD Gun Black, PVD Chrome Black and water-plated black. Compared side by side with the client's sample, our PVD Black Titanium Hairline sheet (S26HL-11) was the closest.

Tune the coating.

Using S26HL-11 as the base, our PVD technicians adjusted the coating time and reactive gas ratio until the color, undertone and sheen matched the reference sample.
Our black hairline finishes
Each finish has a different undertone under strong light. Open any swatch to view details or request a sample.
PVD-beschichtetes Edelstahlblech mit schwarzer Titanbeschichtung und Haarlinie S26HL-11
Used in this case

Titanium Black S26HL-11

Violetter Farbstich
Details anzeigen
Chromschwarzes Edelstahlblech mit Haarlinie S26HL-24

Chrome Black S26HL-24

Grün-gelber Farbstich
Details anzeigen
Gun Black Hairline Stainless Steel Sheet S26HL-12

Gun Black S26HL-12

Neutrales Kohlenstoffgrau
Details anzeigen
Water-Plated Black Hairline Stainless Steel Sheet S26HL-14

Wasserplattiertes Schwarz S26HL-14

Flaches, sattes Schwarz
Details anzeigen
Starting from a stock finish rather than a blank color makes the match repeatable for every reorder.
Send us your color sampleExplore our black stainless steel

Batch-to-Batch Consistency

Premium audio brands rarely start with a large order. A small trial batch to confirm the color and test market response is a normal first step, and reorders follow once the product sells.
That makes color consistency between batches a brand-image issue: every reorder has to match the panels already on the market. Before each shipment, Sanmei Metal checks the sheets with a colorimeter against the client's approved sample, so every sheet in every batch has the color the client signed off.
Start with a test batch
LAB-Mobitoring in Sanmei-Metall
Every batch is checked with a colorimeter against the client's approved sample.

Ready for Laser Cutting and Bending

The client cuts each 1219 × 1524 mm sheet into 400 × 500 mm panels and bends them in its own facility. Standard protective films can lift, bubble or tear back along the cut line, leaving the coated edge unprotected.
Sanmei Metal angewendet
Polifilm laser-cutting film, which stays bonded through cutting so the PVD surface remains covered right up to the edge, and the coated surface bends cleanly at the fold lines without cracking.
Laser cutting, bending, deep forming and long storage each call for a different film. Tell us how your panels will be processed and we will recommend a suitable one.
Schildern Sie uns Ihren Prozess.Details zur Schutzfolie

Projektzusammenfassung

Sending a physical sample is the most reliable way to make sure bulk production matches what you expect. Lighting and screens change how a color looks, so the black a supplier sees and the black a client has in mind are often not the same.

For this project, Sanmei Metal custom-tuned a standard finish to the client’s sample, and supplied a material grade and protective film suited to the client’s own laser cutting and bending.

Choosing stainless steel for speaker parts is not difficult. The details are: a thickness that keeps the panel light without losing rigidity, a color that fits the brand’s positioning, and a grade suited to how the product is made and used.
Erzähl uns von deinem ProjektProdukte in diesem Fall
Produkte in diesem Fall

PVD Black Titanium Hairline Stainless Steel Sheet

The back panels in this case were made from our PVD Black Titanium Hairline sheet (S26HL-11), color-tuned to the client's reference sample and supplied with laser-cutting film.
Product code
S26HL-11
Note in diesem Fall
304
Beenden
PVD Black Titanium, hairline
Größe in diesem Fall
1.5 × 1219 × 1524 mm
View black sheetsAngebot anfordern
Nächste Projekte: Keine

Das könnte dir auch gefallen

Mehr anzeigen+

Kontaktieren Sie uns

Kreativzentrum, Bezirk Shunde, Stadt Foshan, Provinz Guangdong, 528315, China
+8615015653566 / 0757-87668353
Paige Deng
marketing@sanmeimetal.com

    Ziehen Sie Ihre Dateien oder Bilder hierher (optional).

    oder Durchsuchen

    JPG/ PNG/ DWG / PDF / DOCX / ZIP (max. 20 MB)

    TEL: +8615015653566 / 0757-87668353
    E-Mail: marketing@sanmeimetal.com

    Hauptsitz:
    Creating Center, Nr. 142, Yuhe Road, Lecong Town, Shunde District, Foshan City, Guangdong Province, China. 528315

    Fabrik: Logistikstadt Liyuan, Stadt Chencun, Bezirk Shunde, Stadt Foshan, Provinz Guangdong, China. 528313

    Angebot anfordern

    Bitte geben Sie alle benötigten Größen, Ausführungen und Mengen an. Kleinmengen sind willkommen. Wir antworten Ihnen umgehend per E-Mail. Sie können uns auch unter marketing@sanmeimetal.com erreichen.

    Größen, Ausführungen und Mengen eine Zeile pro Artikel

      Sie sind noch nicht bereit, ein Formular auszufüllen? Weitere Möglichkeiten, uns zu erreichen

      kreuzen

      Sprache

      Kontaktieren Sie uns
      1
      Hallo! Teilen Sie uns mit, für welches Edelstahlprodukt oder welche Oberflächenbehandlung Sie sich interessieren – oder lassen Sie uns wissen, ob Sie zunächst ein Muster erhalten möchten. Wir melden uns umgehend bei Ihnen.