← العودة إلى التصنيفات

Project Case · USA · Custom Fabrication + PVD Color

Apartment Intercom Panel Renovation | USA

Custom 304 stainless steel intercom cover plates in Champagne Gold mirror PVD, cut, punched and bent to the client's drawing before coating, for an apartment renovation in the USA.
موقع
الولايات المتحدة الأمريكية
مادة
304 stainless steel, 1.5 mm
ينهي
Champagne Gold, mirror, PVD
طلب
Apartment intercom cover plate
rendering of custom champagne gold mirror stainless steel intercom cover plate

نظرة عامة على المشروع

A client in the USA was renovating the entry intercom stations of an apartment building. The original intercom covers on the ground floor looked worn and dated, so the client wanted new stainless steel cover plates that fit the existing intercom units and gave the lobby a more premium look. They chose 304 stainless steel, 1.5 mm thick, in a Champagne Gold mirror PVD finish.

Project Specs

طلب
Apartment entry intercom cover plate (renovation)
مادة
الفولاذ المقاوم للصدأ 304
سماكة
1.5 مم
ينهي
Champagne Gold, mirror, PVD
التصنيع
Cutting, punching, bending, deburring per client drawing
موقع
الولايات المتحدة الأمريكية

From Drawing to Finished Part

The client sent us their drawing. Because the cover is a formed part, not a flat sheet, the order of operations matters.
1
drawing of custom champagne gold mirror stainless steel intercom cover plate, 304 1.5mm, bent and punched before PVD coating

Drawing

The client sent the cover plate drawing, and we cut the 304 sheet to its flat pattern.
2
custom champagne gold mirror stainless steel intercom cover plate, 304 1.5mm, bent and punched before PVD coating

Punching and bending

We punched the mounting holes and slots, bent the recessed back box that sits inside the wall, and deburred every cut and hole.
3
custom champagne gold mirror stainless steel intercom cover plate, 304 1.5mm, bent and punched before PVD coating (1)

طلاء PVD

Only after forming did the finished part go into the vacuum chamber for Champagne Gold coating.
4
packing of custom champagne gold mirror stainless steel intercom cover plate

غشاء واقٍ

Each plate was fully covered with protective film to keep the mirror surface free of scratches.
عملية طلاء PVD على صفائح الفولاذ المقاوم للصدأ

Why Color After Bending?

If a sheet is PVD-coated first and bent afterwards, the coating can crack or show stress marks at the bend lines, and freshly cut holes leave bare, uncoated edges. When the part is coated after fabrication, the bends, inner walls and hole edges all get the same even gold color.

One Supplier, From Material to Finished Part

All the cutting, punching, bending and deburring was done in Sanmei Metal's own processing center, and coloring was done in-house too. The client sent one drawing and received finished cover plates ready to install. They didn't have to coordinate between a sheet supplier, a fabrication shop and a coating plant.
packing of custom champagne gold mirror stainless steel intercom cover plate

Packed to Protect the Mirror Finish

The mirror surface is easy to scratch. So each plate is fully covered with protective film, the recessed channel is filled with EPE foam, and the plate is wrapped again before crating, so the finish arrives undamaged.

Renovating with Stainless Steel: Built for the Long Term

Many buildings across Europe and the US are reaching the age where entrances, lobbies, elevators and façades need renovation. More owners now look past the lowest upfront cost and choose materials that will still look good and perform well decades later. Stainless steel fits that long-term thinking: it resists corrosion, keeps its appearance with simple cleaning, and PVD color adds a premium finish without painting or recoating.

There is a stainless steel grade for almost any location. Sanmei Metal helps you pick the right grade for where the part will be installed, so you don't overpay for indoor parts or under-spec outdoor ones.

201 and 430

For dry indoor areas.

304

The all-round choice for most interiors and sheltered entrances.

316

For outdoor, coastal or high-humidity environments.

Have a renovation project, whether wall cladding, ألواح المصاعد, intercom or mailbox covers, or other building hardware? Send us your drawings or site measurements. Sanmei Metal supplies the material, fabricates it to your drawing and finishes it in-house.

لوحة من الفولاذ المقاوم للصدأ بلون ذهبي شامبانيا تستخدم في خزانة المطبخ
المنتجات في هذه الحالة

Champagne Gold Mirror Stainless Steel Sheet

The cover plates in this case were made from 304 stainless steel with a mirror finish, coated in Champagne Gold PVD after fabrication. The same color is available as sheet in other finishes and grades.
الدرجة في هذه الحالة
304
سماكة
1.5 مم
ينهي
مرآة
اللون
Champagne Gold PVD
التالي المشاريع: لا أحد

قد يعجبك أيضاً

عرض المزيد+

اتصل بنا

مركز الإبداع، منطقة شوند، مدينة فوشان، مقاطعة قوانغدونغ، 528315، الصين

    اسحب ملفاتك أو صورك إلى هنا (اختياري)

    أو تصفح

    JPG/ PNG/ DWG / PDF / DOCX / ZIP (بحد أقصى 20 ميجابايت)

    المقر الرئيسي:
    مركز الإبداع، رقم ١٤٢، طريق يوهي، بلدة ليكونج، منطقة شوند، مدينة فوشان، مقاطعة قوانغدونغ، الصين. ٥٢٨٣١٥

    مصنع: مدينة لييوان اللوجستية، بلدة تشينكون، منطقة شوند، مدينة فوشان، مقاطعة قوانغدونغ، الصين. 528313

    احصل على عرض سعر

    يرجى ذكر جميع المقاسات المطلوبة، مع تحديد نوع التشطيب والكمية. نرحب بالطلبات الصغيرة. سنرد عليكم عبر البريد الإلكتروني قريبًا. كما يمكنكم مراسلتنا على البريد الإلكتروني marketing@sanmeimetal.com.

    شركة سانمي ميتال هي شركة لتوريد الفولاذ المقاوم للصدأ مقرها في فوشان، الصين. نقوم بالشحن إلى العملاء في جميع أنحاء العالم.

    الأحجام والتشطيبات والكميات سطر واحد لكل عنصر

      يعبر

      لغة