← Volver a las categorías

Project Case · USA · Custom Fabrication + PVD Color

Apartment Intercom Panel Renovation | USA

Custom 304 stainless steel intercom cover plates in Champagne Gold mirror PVD, cut, punched and bent to the client's drawing before coating, for an apartment renovation in the USA.
Ubicación
EE.UU
Material
304 stainless steel, 1.5 mm
Finalizar
Champagne Gold, mirror, PVD
Solicitud
Apartment intercom cover plate
rendering of custom champagne gold mirror stainless steel intercom cover plate

Descripción general del proyecto

A client in the USA was renovating the entry intercom stations of an apartment building. The original intercom covers on the ground floor looked worn and dated, so the client wanted new stainless steel cover plates that fit the existing intercom units and gave the lobby a more premium look. They chose 304 stainless steel, 1.5 mm thick, in a Champagne Gold mirror PVD finish.

Project Specs

Solicitud
Apartment entry intercom cover plate (renovation)
Material
acero inoxidable 304
Espesor
1,5 mm
Finalizar
Champagne Gold, mirror, PVD
Fabricación
Cutting, punching, bending, deburring per client drawing
Ubicación
EE.UU

From Drawing to Finished Part

The client sent us their drawing. Because the cover is a formed part, not a flat sheet, the order of operations matters.
1
drawing of custom champagne gold mirror stainless steel intercom cover plate, 304 1.5mm, bent and punched before PVD coating

Drawing

The client sent the cover plate drawing, and we cut the 304 sheet to its flat pattern.
2
custom champagne gold mirror stainless steel intercom cover plate, 304 1.5mm, bent and punched before PVD coating

Punching and bending

We punched the mounting holes and slots, bent the recessed back box that sits inside the wall, and deburred every cut and hole.
3
custom champagne gold mirror stainless steel intercom cover plate, 304 1.5mm, bent and punched before PVD coating (1)

Recubrimiento PVD

Only after forming did the finished part go into the vacuum chamber for Champagne Gold coating.
4
packing of custom champagne gold mirror stainless steel intercom cover plate

Película protectora

Each plate was fully covered with protective film to keep the mirror surface free of scratches.
Proceso de recubrimiento PVD sobre lámina de acero inoxidable

Why Color After Bending?

If a sheet is PVD-coated first and bent afterwards, the coating can crack or show stress marks at the bend lines, and freshly cut holes leave bare, uncoated edges. When the part is coated after fabrication, the bends, inner walls and hole edges all get the same even gold color.

One Supplier, From Material to Finished Part

All the cutting, punching, bending and deburring was done in Sanmei Metal's own processing center, and coloring was done in-house too. The client sent one drawing and received finished cover plates ready to install. They didn't have to coordinate between a sheet supplier, a fabrication shop and a coating plant.
packing of custom champagne gold mirror stainless steel intercom cover plate

Packed to Protect the Mirror Finish

The mirror surface is easy to scratch. So each plate is fully covered with protective film, the recessed channel is filled with EPE foam, and the plate is wrapped again before crating, so the finish arrives undamaged.

Renovating with Stainless Steel: Built for the Long Term

Many buildings across Europe and the US are reaching the age where entrances, lobbies, elevators and façades need renovation. More owners now look past the lowest upfront cost and choose materials that will still look good and perform well decades later. Stainless steel fits that long-term thinking: it resists corrosion, keeps its appearance with simple cleaning, and PVD color adds a premium finish without painting or recoating.

There is a stainless steel grade for almost any location. Sanmei Metal helps you pick the right grade for where the part will be installed, so you don't overpay for indoor parts or under-spec outdoor ones.

201 and 430

For dry indoor areas.

304

The all-round choice for most interiors and sheltered entrances.

316

For outdoor, coastal or high-humidity environments.

Have a renovation project, whether wall cladding, paneles de ascensor, intercom or mailbox covers, or other building hardware? Send us your drawings or site measurements. Sanmei Metal supplies the material, fabricates it to your drawing and finishes it in-house.

Panel de acero inoxidable color oro champán utilizado en gabinetes de cocina.
Productos en este caso

Champagne Gold Mirror Stainless Steel Sheet

The cover plates in this case were made from 304 stainless steel with a mirror finish, coated in Champagne Gold PVD after fabrication. The same color is available as sheet in other finishes and grades.
Calificación en este caso
304
Espesor
1,5 mm
Finalizar
Espejo
Color
Champagne Gold PVD
Próximo Proyectos: Ninguno

También te podría gustar

Ver más+

Contáctenos

Centro de Creación, Distrito de Shunde, Ciudad de Foshan, Provincia de Guangdong, 528315, China

    Arrastra tus archivos o imágenes aquí (opcional)

    o Navegar

    JPG/ PNG/ DWG / PDF / DOCX / ZIP (Máx. 20 MB)

    Sede:
    Centro de Creación, n.º 142, calle Yuhe, pueblo de Lecong, distrito de Shunde, ciudad de Foshan, provincia de Guangdong, China. 528315

    Fábrica: Ciudad Logística de Liyuan, Pueblo de Chencun, Distrito de Shunde, Ciudad de Foshan, Provincia de Guangdong, China. 528313

    Obtén un presupuesto

    Indique todas las medidas que necesita, con su acabado y cantidad correspondientes. Aceptamos pedidos pequeños. Le responderemos por correo electrónico en breve. También puede escribirnos a marketing@sanmeimetal.com.

    Sanmei Metal es un proveedor de acero inoxidable con sede en Foshan, China. Realizamos envíos a clientes de todo el mundo.

    Tamaños, acabados y cantidades una línea por artículo

      cruz

      Idioma