← 카테고리로 돌아가기

Project Case · USA · Custom Fabrication + PVD Color

Apartment Intercom Panel Renovation | USA

Custom 304 stainless steel intercom cover plates in Champagne Gold mirror PVD, cut, punched and bent to the client's drawing before coating, for an apartment renovation in the USA.
위치
미국
재료
304 stainless steel, 1.5 mm
마치다
Champagne Gold, mirror, PVD
애플리케이션
Apartment intercom cover plate
rendering of custom champagne gold mirror stainless steel intercom cover plate

프로젝트 개요

A client in the USA was renovating the entry intercom stations of an apartment building. The original intercom covers on the ground floor looked worn and dated, so the client wanted new stainless steel cover plates that fit the existing intercom units and gave the lobby a more premium look. They chose 304 stainless steel, 1.5 mm thick, in a Champagne Gold mirror PVD finish.

Project Specs

애플리케이션
Apartment entry intercom cover plate (renovation)
재료
304 스테인리스 스틸
두께
1.5mm
마치다
Champagne Gold, mirror, PVD
제작
Cutting, punching, bending, deburring per client drawing
위치
미국

From Drawing to Finished Part

The client sent us their drawing. Because the cover is a formed part, not a flat sheet, the order of operations matters.
1
drawing of custom champagne gold mirror stainless steel intercom cover plate, 304 1.5mm, bent and punched before PVD coating

Drawing

The client sent the cover plate drawing, and we cut the 304 sheet to its flat pattern.
2
custom champagne gold mirror stainless steel intercom cover plate, 304 1.5mm, bent and punched before PVD coating

Punching and bending

We punched the mounting holes and slots, bent the recessed back box that sits inside the wall, and deburred every cut and hole.
3
custom champagne gold mirror stainless steel intercom cover plate, 304 1.5mm, bent and punched before PVD coating (1)

PVD코팅

Only after forming did the finished part go into the vacuum chamber for Champagne Gold coating.
4
packing of custom champagne gold mirror stainless steel intercom cover plate

보호 필름

Each plate was fully covered with protective film to keep the mirror surface free of scratches.
스테인리스강판에 PVD 코팅 공정을 적용했습니다.

Why Color After Bending?

If a sheet is PVD-coated first and bent afterwards, the coating can crack or show stress marks at the bend lines, and freshly cut holes leave bare, uncoated edges. When the part is coated after fabrication, the bends, inner walls and hole edges all get the same even gold color.

One Supplier, From Material to Finished Part

All the cutting, punching, bending and deburring was done in Sanmei Metal's own processing center, and coloring was done in-house too. The client sent one drawing and received finished cover plates ready to install. They didn't have to coordinate between a sheet supplier, a fabrication shop and a coating plant.
packing of custom champagne gold mirror stainless steel intercom cover plate

Packed to Protect the Mirror Finish

The mirror surface is easy to scratch. So each plate is fully covered with protective film, the recessed channel is filled with EPE foam, and the plate is wrapped again before crating, so the finish arrives undamaged.

Renovating with Stainless Steel: Built for the Long Term

Many buildings across Europe and the US are reaching the age where entrances, lobbies, elevators and façades need renovation. More owners now look past the lowest upfront cost and choose materials that will still look good and perform well decades later. Stainless steel fits that long-term thinking: it resists corrosion, keeps its appearance with simple cleaning, and PVD color adds a premium finish without painting or recoating.

There is a stainless steel grade for almost any location. Sanmei Metal helps you pick the right grade for where the part will be installed, so you don't overpay for indoor parts or under-spec outdoor ones.

201 and 430

For dry indoor areas.

304

The all-round choice for most interiors and sheltered entrances.

316

For outdoor, coastal or high-humidity environments.

Have a renovation project, whether wall cladding, 엘리베이터 패널, intercom or mailbox covers, or other building hardware? Send us your drawings or site measurements. Sanmei Metal supplies the material, fabricates it to your drawing and finishes it in-house.

샴페인 골드 색상의 스테인리스 스틸 패널이 주방 캐비닛에 사용되었습니다.
이 경우 제품은

Champagne Gold Mirror Stainless Steel Sheet

The cover plates in this case were made from 304 stainless steel with a mirror finish, coated in Champagne Gold PVD after fabrication. The same color is available as sheet in other finishes and grades.
이 경우 등급
304
두께
1.5mm
마치다
거울
색상
Champagne Gold PVD
다음 프로젝트: 없음

당신은 또한 좋아할지도 모릅니다

더 보기+

문의하기

중국 광둥성 포산시 순더구 크리에이팅 센터, 우편번호 528315

    파일이나 사진을 여기에 드래그하세요 (선택 사항).

    또는 먹다

    JPG/ PNG/ DWG / PDF / DOCX / ZIP (최대 20MB)

    본부:
    중국 광둥성 포산시 순더구 러총진 위허로 142호 창작센터 528315

    공장: 중국 광둥성 포산시 순더구 천춘진 리위안 물류도시 528313

    견적 받기

    필요한 모든 사이즈와 각 사이즈별 마감, 수량을 기재해 주세요. 소량 주문도 환영합니다. 이메일로 곧 답변드리겠습니다. marketing@sanmeimetal.com으로 문의하셔도 됩니다.

    산메이 메탈은 중국 포산에 본사를 둔 스테인리스강 공급업체입니다. 당사는 전 세계 고객에게 제품을 공급합니다.

    크기, 마감 및 수량 항목당 한 줄씩

      십자가

      언어