← Назад к категориям

Project Case · USA · Custom Fabrication + PVD Color

Apartment Intercom Panel Renovation | USA

Custom 304 stainless steel intercom cover plates in Champagne Gold mirror PVD, cut, punched and bent to the client's drawing before coating, for an apartment renovation in the USA.
Расположение
США
Материал
304 stainless steel, 1.5 mm
Заканчивать
Champagne Gold, mirror, PVD
Приложение
Apartment intercom cover plate
rendering of custom champagne gold mirror stainless steel intercom cover plate

Обзор проекта

A client in the USA was renovating the entry intercom stations of an apartment building. The original intercom covers on the ground floor looked worn and dated, so the client wanted new stainless steel cover plates that fit the existing intercom units and gave the lobby a more premium look. They chose 304 stainless steel, 1.5 mm thick, in a Champagne Gold mirror PVD finish.

Project Specs

Приложение
Apartment entry intercom cover plate (renovation)
Материал
нержавеющая сталь 304
Толщина
1,5 мм
Заканчивать
Champagne Gold, mirror, PVD
Изготовление
Cutting, punching, bending, deburring per client drawing
Расположение
США

From Drawing to Finished Part

The client sent us their drawing. Because the cover is a formed part, not a flat sheet, the order of operations matters.
1
drawing of custom champagne gold mirror stainless steel intercom cover plate, 304 1.5mm, bent and punched before PVD coating

Drawing

The client sent the cover plate drawing, and we cut the 304 sheet to its flat pattern.
2
custom champagne gold mirror stainless steel intercom cover plate, 304 1.5mm, bent and punched before PVD coating

Punching and bending

We punched the mounting holes and slots, bent the recessed back box that sits inside the wall, and deburred every cut and hole.
3
custom champagne gold mirror stainless steel intercom cover plate, 304 1.5mm, bent and punched before PVD coating (1)

PVD-покрытие

Only after forming did the finished part go into the vacuum chamber for Champagne Gold coating.
4
packing of custom champagne gold mirror stainless steel intercom cover plate

Защитная пленка

Each plate was fully covered with protective film to keep the mirror surface free of scratches.
Процесс нанесения PVD-покрытия на лист нержавеющей стали

Why Color After Bending?

If a sheet is PVD-coated first and bent afterwards, the coating can crack or show stress marks at the bend lines, and freshly cut holes leave bare, uncoated edges. When the part is coated after fabrication, the bends, inner walls and hole edges all get the same even gold color.

One Supplier, From Material to Finished Part

All the cutting, punching, bending and deburring was done in Sanmei Metal's own processing center, and coloring was done in-house too. The client sent one drawing and received finished cover plates ready to install. They didn't have to coordinate between a sheet supplier, a fabrication shop and a coating plant.
packing of custom champagne gold mirror stainless steel intercom cover plate

Packed to Protect the Mirror Finish

The mirror surface is easy to scratch. So each plate is fully covered with protective film, the recessed channel is filled with EPE foam, and the plate is wrapped again before crating, so the finish arrives undamaged.

Renovating with Stainless Steel: Built for the Long Term

Many buildings across Europe and the US are reaching the age where entrances, lobbies, elevators and façades need renovation. More owners now look past the lowest upfront cost and choose materials that will still look good and perform well decades later. Stainless steel fits that long-term thinking: it resists corrosion, keeps its appearance with simple cleaning, and PVD color adds a premium finish without painting or recoating.

There is a stainless steel grade for almost any location. Sanmei Metal helps you pick the right grade for where the part will be installed, so you don't overpay for indoor parts or under-spec outdoor ones.

201 and 430

For dry indoor areas.

304

The all-round choice for most interiors and sheltered entrances.

316

For outdoor, coastal or high-humidity environments.

Have a renovation project, whether wall cladding, панели лифта, intercom or mailbox covers, or other building hardware? Send us your drawings or site measurements. Sanmei Metal supplies the material, fabricates it to your drawing and finishes it in-house.

Панель из нержавеющей стали цвета шампанского золота, использованная в кухонном шкафу.
Товары в данном случае

Champagne Gold Mirror Stainless Steel Sheet

The cover plates in this case were made from 304 stainless steel with a mirror finish, coated in Champagne Gold PVD after fabrication. The same color is available as sheet in other finishes and grades.
Оценка в данном случае
304
Толщина
1,5 мм
Заканчивать
Зеркало
Цвет
Champagne Gold PVD
Следующий проекты: Никто

Вам также может понравиться

Посмотреть больше+

Связаться с нами

Центр развития, район Шунде, город Фошань, провинция Гуандун, 528315, Китай

    Перетащите сюда свои файлы или изображения (необязательно)

    или Просматривать

    JPG/ PNG/ DWG / PDF / DOCX / ZIP (макс. 20 МБ)

    Штаб-квартира:
    Центр создания, № 142, улица Юйхэ, город Лецун, район Шунде, город Фошань, провинция Гуандун, Китай. 528315

    Фабрика: Город логистики Лиюань, город Чэньцунь, район Шунде, город Фошань, провинция Гуандун, Китай. 528313

    Получить ценовое предложение

    Укажите все необходимые размеры, каждый с указанием отделки и количества. Принимаем заказы на небольшие партии. Мы ответим вам по электронной почте в ближайшее время. Вы также можете написать нам по адресу marketing@sanmeimetal.com.

    Компания Sanmei Metal — поставщик нержавеющей стали, базирующийся в городе Фошань, Китай. Мы осуществляем поставки клиентам по всему миру.

    Размеры, отделка и количество одна строка на каждый элемент

      крест

      Язык