Kualitas Terbaik | Siap Kirim | Tidak Ada MOQ

Nomor 4 is the mill/industry grit designation for this finish — the name used in ASTM/US material specs and mill certificates. Satin finish is the same surface described by its visual result, and is the term more commonly used in architectural, retail, and consumer product contexts across the US and Europe. 

Visually, satin No.4 carries fine parallel lines running in one direction across the metal — shorter and less continuous than hairline's grain, but with a brighter, more lustrous surface sheen. It sits between 2B and mirror on the reflectivity scale, with noticeably more shine than hairline's flatter, more matte appearance.

Sanmei supplies this satin No.4 finish on 304, 316, and 430 stainless steel coil and sheet, ready to ship with no MOQ.

Sanmei's coil-based No.4 satin finish is especially valuable when you need:

• Matching grain direction and brightness across multiple sheets
• Reliable, repeatable results over high-volume orders
• Seamless installation across elevators, wall cladding, appliances, or fixtures

Even in large-scale architectural and product applications, our No.4 satin coils deliver a consistent, professional appearance — sheet to sheet, batch to batch.

Satin No.4 is common on flatware, cutlery, and cookware like double-walled cafetieres — the directional grain masks fine scratching from daily washing, keeping the surface looking consistent over years of use.

The brushed texture conceals water spots and light scratching better than a mirror or 2B surface, which is why it's a standard choice for kitchen sinks and similar fixtures.

Moderate reflectivity limits glare in indoor spaces, and the brushed surface holds up under constant hand contact — a common reason it's used for handrails and similar high-touch architectural elements.

The matte-satin sheen gives a clean, understated look on visible surfaces, without showing handling marks from daily use.

Base coils come from our TOP partner mills (Lisco, Tisco, Jisco, Posco PZSS, Yongjin, Hongwang) before undergoing surface finishing and coating in-house at our Foshan facility. 

Every sheet and coil ships with protective PVC film from Polifilm (Germany) and Novacel (France). Adhesion level is matched to your downstream process — strong enough to stay in place through laser cutting or stamping without gas pressure lifting the film and causing edge blowout, but not so strong that it leaves residue when removed.

Seaworthy packaging using sturdy wooden crates or steel frames to ensure 100% surface perfection upon arrival. Exporting directly to North America, Europe, Middle East, and Southeast Asia.