• Sona ermek ➔
  • Malzemeler ➔
  • Yapısal Çelik Bileşenler ➔
  • Mimari Metal İşleri ➔
← Kategorilere Geri Dön

304 PVD Black Titanium Hairline Stainless Steel Sheets for US Speaker Back Panels

Projemiz hakkında bilgi verinBu durumda ürünler
A US audio brand sourced color-matched 304 PVD Black Titanium Hairline stainless steel sheets from Sanmei Metal for the back panels of its premium speakers.
Konum
Amerika Birleşik Devletleri
Malzeme
304 paslanmaz çelik
Sona ermek
PVD Black Titanium, hairline
Başvuru
Speaker back panels
black stainless steel speaker back panel
Concept rendering: PVD Black Titanium Hairline stainless steel speaker back panel.

Proje Genel Bakışı

A US audio brand needed black stainless steel back panels for a premium speaker line. The brand already had an established supply chain in the US, but needed a black finish that matched its existing reference sample exactly.
The 400 × 500 mm panels are laser cut and bent in the client's own facility, so the sheets also had to arrive ready for fabrication, with a decorative surface that would come through cutting and bending undamaged.

Sipariş özellikleri

Seviye
304 paslanmaz çelik
Sona ermek
PVD Black Titanium, hairline, color-matched to client sample
Temel kaplama
S26HL-11, tuned to the reference sample
Sheet size
1.5 × 1219 × 1524 mm (approx. 0.059" × 48" × 60")
Finished part
400 × 500 mm back panels, laser cut and bent by the client
Koruyucu film
[FILM BRAND + THICKNESS] laser-cutting film

Matching a Black Reference Sample

In premium audio, the back panel is part of the product's identity. "Black" covers a wide range of tones, and a slight shift in undertone or sheen shows immediately when a panel sits next to the rest of the product. The client sent its physical reference sample to Sanmei Metal for matching.
Two steps to an exact match

Start from a standard finish.

Sanmei Metal produces several blacks in-house: PVD Ti-Black, PVD Gun Black, PVD Chrome Black and water-plated black. Compared side by side with the client's sample, our PVD Black Titanium Hairline sheet (S26HL-11) was the closest.

Tune the coating.

Using S26HL-11 as the base, our PVD technicians adjusted the coating time and reactive gas ratio until the color, undertone and sheen matched the reference sample.
Our black hairline finishes
Each finish has a different undertone under strong light. Open any swatch to view details or request a sample.
PVD Siyah Titanyum İnce Çizgili Paslanmaz Çelik Levha S26HL-11
Used in this case

Titanyum Siyahı S26HL-11

Mor ton
Ayrıntıları görüntüle
Krom Siyah İnce Çizgili Paslanmaz Çelik Levha S26HL-24

Krom Siyah S26HL-24

Yeşil-sarı ton
Ayrıntıları görüntüle
Silah Siyahı İnce Çizgili Paslanmaz Çelik Levha S26HL-12

Silah Siyahı S26HL-12

Nötr karbon grisi
Ayrıntıları görüntüle
Water-Plated Black Hairline Stainless Steel Sheet S26HL-14

Su Kaplamalı Siyah S26HL-14

Düz, tekdüze siyah
Ayrıntıları görüntüle
Starting from a stock finish rather than a blank color makes the match repeatable for every reorder.
Send us your color sampleExplore our black stainless steel

Batch-to-Batch Consistency

Premium audio brands rarely start with a large order. A small trial batch to confirm the color and test market response is a normal first step, and reorders follow once the product sells.
That makes color consistency between batches a brand-image issue: every reorder has to match the panels already on the market. Before each shipment, Sanmei Metal checks the sheets with a colorimeter against the client's approved sample, so every sheet in every batch has the color the client signed off.
Start with a test batch
LAB mobitoring in sanmei metal
Every batch is checked with a colorimeter against the client's approved sample.

Ready for Laser Cutting and Bending

The client cuts each 1219 × 1524 mm sheet into 400 × 500 mm panels and bends them in its own facility. Standard protective films can lift, bubble or tear back along the cut line, leaving the coated edge unprotected.
Sanmei Metal uygulandı
Polifilm laser-cutting film, which stays bonded through cutting so the PVD surface remains covered right up to the edge, and the coated surface bends cleanly at the fold lines without cracking.
Laser cutting, bending, deep forming and long storage each call for a different film. Tell us how your panels will be processed and we will recommend a suitable one.
Bize sürecinizi anlatın.Koruyucu film detayları

Proje Özeti

Sending a physical sample is the most reliable way to make sure bulk production matches what you expect. Lighting and screens change how a color looks, so the black a supplier sees and the black a client has in mind are often not the same.

For this project, Sanmei Metal custom-tuned a standard finish to the client’s sample, and supplied a material grade and protective film suited to the client’s own laser cutting and bending.

Choosing stainless steel for speaker parts is not difficult. The details are: a thickness that keeps the panel light without losing rigidity, a color that fits the brand’s positioning, and a grade suited to how the product is made and used.
Projemiz hakkında bilgi verinBu durumda ürünler
Bu durumda ürünler

PVD Black Titanium Hairline Stainless Steel Sheet

The back panels in this case were made from our PVD Black Titanium Hairline sheet (S26HL-11), color-tuned to the client's reference sample and supplied with laser-cutting film.
Product code
S26HL-11
Bu durumda not
304
Sona ermek
PVD Black Titanium, hairline
Bu durumda boyut
1.5 × 1219 × 1524 mm
View black sheetsFiyat teklifi alın
Sonraki projeler: Hiçbiri

Ayrıca Şunları da Beğenebilirsiniz

Daha fazlasını görüntüle+

Bize Ulaşın

Yaratıcı Merkez, Shunde Bölgesi, Foshan Şehri, Guangdong Eyaleti, 528315, Çin
+8615015653566 / 0757-87668353
Paige Deng
pazarlama@sanmeimetal.com

    Dosyalarınızı veya resimlerinizi buraya sürükleyin (isteğe bağlı)

    veya Gözat

    JPG/ PNG/ DWG / PDF / DOCX / ZIP (Maks. 20MB)

    TELEFON: +8615015653566 / 0757-87668353
    E-posta: pazarlama@sanmeimetal.com

    Karargah:
    Çin, Guangdong Eyaleti, Foshan Şehri, Shunde Bölgesi, Lecong Kasabası, Yuhe Yolu, No.142, İnşaat Merkezi. 528315

    Fabrika: Liyuan Lojistik Şehri, Chencun Kasabası, Shunde Bölgesi, Foshan Şehri, Guangdong Eyaleti, Çin. 528313

    Fiyat teklifi alın

    İhtiyacınız olan her boyutu, her birinin kendine özgü yüzey işlemi ve miktarıyla birlikte listeleyin. Küçük partiler de kabul edilir. Kısa süre içinde e-posta ile yanıt vereceğiz. Ayrıca marketing@sanmeimetal.com adresine de yazabilirsiniz.

    Ölçüler, yüzey işlemleri ve miktarlar her öğe için bir satır

      Form doldurmaya hazır değil misiniz? Bize ulaşmanın diğer yolları

      geçmek

      Dil

      Bize Ulaşın
      1
      Merhaba! Hangi paslanmaz çelik ürün veya kaplama ile ilgilendiğinizi bize bildirin veya bir örnekle başlamak isteyip istemediğinizi belirtin. Kısa süre içinde size geri döneceğiz.