• Finalizar ➔
  • Materiales ➔
  • Componentes de acero estructural ➔
  • Obras arquitectónicas en metal ➔
← Volver a las categorías

304 PVD Black Titanium Hairline Stainless Steel Sheets for US Speaker Back Panels

Háblanos de tu proyecto.Productos en este caso
A US audio brand sourced color-matched 304 PVD Black Titanium Hairline stainless steel sheets from Sanmei Metal for the back panels of its premium speakers.
Ubicación
Estados Unidos
Material
acero inoxidable 304
Finalizar
PVD Black Titanium, hairline
Solicitud
Speaker back panels
black stainless steel speaker back panel
Concept rendering: PVD Black Titanium Hairline stainless steel speaker back panel.

Descripción general del proyecto

A US audio brand needed black stainless steel back panels for a premium speaker line. The brand already had an established supply chain in the US, but needed a black finish that matched its existing reference sample exactly.
The 400 × 500 mm panels are laser cut and bent in the client's own facility, so the sheets also had to arrive ready for fabrication, with a decorative surface that would come through cutting and bending undamaged.

Especificación del pedido

Calificación
acero inoxidable 304
Finalizar
PVD Black Titanium, hairline, color-matched to client sample
Acabado base
S26HL-11, tuned to the reference sample
Sheet size
1.5 × 1219 × 1524 mm (approx. 0.059" × 48" × 60")
Finished part
400 × 500 mm back panels, laser cut and bent by the client
Película protectora
[FILM BRAND + THICKNESS] laser-cutting film

Matching a Black Reference Sample

In premium audio, the back panel is part of the product's identity. "Black" covers a wide range of tones, and a slight shift in undertone or sheen shows immediately when a panel sits next to the rest of the product. The client sent its physical reference sample to Sanmei Metal for matching.
Two steps to an exact match

Start from a standard finish.

Sanmei Metal produces several blacks in-house: PVD Ti-Black, PVD Gun Black, PVD Chrome Black and water-plated black. Compared side by side with the client's sample, our PVD Black Titanium Hairline sheet (S26HL-11) was the closest.

Tune the coating.

Using S26HL-11 as the base, our PVD technicians adjusted the coating time and reactive gas ratio until the color, undertone and sheen matched the reference sample.
Our black hairline finishes
Each finish has a different undertone under strong light. Open any swatch to view details or request a sample.
Chapa de acero inoxidable PVD negro titanio con acabado cepillado S26HL-11
Used in this case

Titanium Black S26HL-11

Purple cast
Ver detalles
Chapa de acero inoxidable cromado negro cepillado S26HL-24

Chrome Black S26HL-24

Green-yellow cast
Ver detalles
Chapa de acero inoxidable con acabado cepillado negro mate S26HL-12

Gun Black S26HL-12

Neutral carbon gray
Ver detalles
Water-Plated Black Hairline Stainless Steel Sheet S26HL-14

Water-Plated Black S26HL-14

Flat, solid black
Ver detalles
Starting from a stock finish rather than a blank color makes the match repeatable for every reorder.
Send us your color sampleExplore our black stainless steel

Batch-to-Batch Consistency

Premium audio brands rarely start with a large order. A small trial batch to confirm the color and test market response is a normal first step, and reorders follow once the product sells.
That makes color consistency between batches a brand-image issue: every reorder has to match the panels already on the market. Before each shipment, Sanmei Metal checks the sheets with a colorimeter against the client's approved sample, so every sheet in every batch has the color the client signed off.
Start with a test batch
Mobitoring de LAB en metal sanmei
Every batch is checked with a colorimeter against the client's approved sample.

Ready for Laser Cutting and Bending

The client cuts each 1219 × 1524 mm sheet into 400 × 500 mm panels and bends them in its own facility. Standard protective films can lift, bubble or tear back along the cut line, leaving the coated edge unprotected.
Sanmei Metal aplicó
Polifilm laser-cutting film, which stays bonded through cutting so the PVD surface remains covered right up to the edge, and the coated surface bends cleanly at the fold lines without cracking.
Laser cutting, bending, deep forming and long storage each call for a different film. Tell us how your panels will be processed and we will recommend a suitable one.
Cuéntanos tu procesoDetalles de la película protectora

Resumen del proyecto

Sending a physical sample is the most reliable way to make sure bulk production matches what you expect. Lighting and screens change how a color looks, so the black a supplier sees and the black a client has in mind are often not the same.

For this project, Sanmei Metal custom-tuned a standard finish to the client’s sample, and supplied a material grade and protective film suited to the client’s own laser cutting and bending.

Choosing stainless steel for speaker parts is not difficult. The details are: a thickness that keeps the panel light without losing rigidity, a color that fits the brand’s positioning, and a grade suited to how the product is made and used.
Háblanos de tu proyecto.Productos en este caso
Productos en este caso

PVD Black Titanium Hairline Stainless Steel Sheet

The back panels in this case were made from our PVD Black Titanium Hairline sheet (S26HL-11), color-tuned to the client's reference sample and supplied with laser-cutting film.
Product code
S26HL-11
Calificación en este caso
304
Finalizar
PVD Black Titanium, hairline
Tamaño en este caso
1.5 × 1219 × 1524 mm
View black sheetsObtén un presupuesto
Próximo Proyectos: Ninguno

También te podría gustar

Ver más+

Contáctenos

Centro de Creación, Distrito de Shunde, Ciudad de Foshan, Provincia de Guangdong, 528315, China
+8615015653566 / 0757-87668353
Paige Deng
marketing@sanmeimetal.com

    Arrastra tus archivos o imágenes aquí (opcional)

    o Navegar

    JPG/ PNG/ DWG / PDF / DOCX / ZIP (Máx. 20 MB)

    TELÉFONO: +8615015653566 / 0757-87668353
    Correo electrónico: marketing@sanmeimetal.com

    Sede:
    Centro de Creación, n.º 142, calle Yuhe, pueblo de Lecong, distrito de Shunde, ciudad de Foshan, provincia de Guangdong, China. 528315

    Fábrica: Ciudad Logística de Liyuan, Pueblo de Chencun, Distrito de Shunde, Ciudad de Foshan, Provincia de Guangdong, China. 528313

    Obtén un presupuesto

    Indique todas las medidas que necesita, con su acabado y cantidad correspondientes. Aceptamos pedidos pequeños. Le responderemos por correo electrónico en breve. También puede escribirnos a marketing@sanmeimetal.com.

    Tamaños, acabados y cantidades una línea por artículo

      ¿No estás listo para completar un formulario? Otras formas de contactarnos

      cruz

      Idioma

      Contáctenos
      1
      ¡Hola! Cuéntanos qué producto o acabado de acero inoxidable te interesa, o dinos si prefieres comenzar con una muestra. Nos pondremos en contacto contigo en breve.