← Kategorilere Geri Dön

Project Case · USA · Custom Fabrication + PVD Color

Apartment Intercom Panel Renovation | USA

Custom 304 stainless steel intercom cover plates in Champagne Gold mirror PVD, cut, punched and bent to the client's drawing before coating, for an apartment renovation in the USA.
Konum
Amerika
Malzeme
304 stainless steel, 1.5 mm
Sona ermek
Champagne Gold, mirror, PVD
Başvuru
Apartment intercom cover plate
rendering of custom champagne gold mirror stainless steel intercom cover plate

Proje Genel Bakışı

A client in the USA was renovating the entry intercom stations of an apartment building. The original intercom covers on the ground floor looked worn and dated, so the client wanted new stainless steel cover plates that fit the existing intercom units and gave the lobby a more premium look. They chose 304 stainless steel, 1.5 mm thick, in a Champagne Gold mirror PVD finish.

Project Specs

Başvuru
Apartment entry intercom cover plate (renovation)
Malzeme
304 paslanmaz çelik
Kalınlık
1,5 mm
Sona ermek
Champagne Gold, mirror, PVD
Üretim
Cutting, punching, bending, deburring per client drawing
Konum
Amerika

From Drawing to Finished Part

The client sent us their drawing. Because the cover is a formed part, not a flat sheet, the order of operations matters.
1
drawing of custom champagne gold mirror stainless steel intercom cover plate, 304 1.5mm, bent and punched before PVD coating

Drawing

The client sent the cover plate drawing, and we cut the 304 sheet to its flat pattern.
2
custom champagne gold mirror stainless steel intercom cover plate, 304 1.5mm, bent and punched before PVD coating

Punching and bending

We punched the mounting holes and slots, bent the recessed back box that sits inside the wall, and deburred every cut and hole.
3
custom champagne gold mirror stainless steel intercom cover plate, 304 1.5mm, bent and punched before PVD coating (1)

PVD kaplama

Only after forming did the finished part go into the vacuum chamber for Champagne Gold coating.
4
packing of custom champagne gold mirror stainless steel intercom cover plate

Koruyucu film

Each plate was fully covered with protective film to keep the mirror surface free of scratches.
Paslanmaz çelik levha üzerinde PVD kaplama işlemi

Why Color After Bending?

If a sheet is PVD-coated first and bent afterwards, the coating can crack or show stress marks at the bend lines, and freshly cut holes leave bare, uncoated edges. When the part is coated after fabrication, the bends, inner walls and hole edges all get the same even gold color.

One Supplier, From Material to Finished Part

All the cutting, punching, bending and deburring was done in Sanmei Metal's own processing center, and coloring was done in-house too. The client sent one drawing and received finished cover plates ready to install. They didn't have to coordinate between a sheet supplier, a fabrication shop and a coating plant.
packing of custom champagne gold mirror stainless steel intercom cover plate

Packed to Protect the Mirror Finish

The mirror surface is easy to scratch. So each plate is fully covered with protective film, the recessed channel is filled with EPE foam, and the plate is wrapped again before crating, so the finish arrives undamaged.

Renovating with Stainless Steel: Built for the Long Term

Many buildings across Europe and the US are reaching the age where entrances, lobbies, elevators and façades need renovation. More owners now look past the lowest upfront cost and choose materials that will still look good and perform well decades later. Stainless steel fits that long-term thinking: it resists corrosion, keeps its appearance with simple cleaning, and PVD color adds a premium finish without painting or recoating.

There is a stainless steel grade for almost any location. Sanmei Metal helps you pick the right grade for where the part will be installed, so you don't overpay for indoor parts or under-spec outdoor ones.

201 and 430

For dry indoor areas.

304

The all-round choice for most interiors and sheltered entrances.

316

For outdoor, coastal or high-humidity environments.

Have a renovation project, whether wall cladding, asansör panelleri, intercom or mailbox covers, or other building hardware? Send us your drawings or site measurements. Sanmei Metal supplies the material, fabricates it to your drawing and finishes it in-house.

Mutfak dolabında kullanılan şampanya altın rengi paslanmaz çelik panel.
Bu durumda ürünler

Champagne Gold Mirror Stainless Steel Sheet

The cover plates in this case were made from 304 stainless steel with a mirror finish, coated in Champagne Gold PVD after fabrication. The same color is available as sheet in other finishes and grades.
Bu durumda not
304
Kalınlık
1,5 mm
Sona ermek
Ayna
Renk
Champagne Gold PVD
Sonraki projeler: Hiçbiri

Ayrıca Şunları da Beğenebilirsiniz

Daha fazlasını görüntüle+

Bize Ulaşın

Yaratıcı Merkez, Shunde Bölgesi, Foshan Şehri, Guangdong Eyaleti, 528315, Çin

    Dosyalarınızı veya resimlerinizi buraya sürükleyin (isteğe bağlı)

    veya Gözat

    JPG/ PNG/ DWG / PDF / DOCX / ZIP (Maks. 20MB)

    Karargah:
    Çin, Guangdong Eyaleti, Foshan Şehri, Shunde Bölgesi, Lecong Kasabası, Yuhe Yolu, No.142, İnşaat Merkezi. 528315

    Fabrika: Liyuan Lojistik Şehri, Chencun Kasabası, Shunde Bölgesi, Foshan Şehri, Guangdong Eyaleti, Çin. 528313

    Fiyat teklifi alın

    İhtiyacınız olan her boyutu, her birinin kendine özgü yüzey işlemi ve miktarıyla birlikte listeleyin. Küçük partiler de kabul edilir. Kısa süre içinde e-posta ile yanıt vereceğiz. Ayrıca marketing@sanmeimetal.com adresine de yazabilirsiniz.

    Sanmei Metal, Çin'in Foshan şehrinde bulunan bir paslanmaz çelik tedarikçisidir. Dünyanın her yerine ürün gönderiyoruz.

    Ölçüler, yüzey işlemleri ve miktarlar her öğe için bir satır

      geçmek

      Dil