• Menyelesaikan ➔
  • Bahan ➔
  • Komponen Baja Struktural ➔
  • Pekerjaan Logam Arsitektur ➔
← Kembali ke Kategori

304 PVD Black Titanium Hairline Stainless Steel Sheets for US Speaker Back Panels

Ceritakan tentang proyek AndaProduk dalam hal ini
A US audio brand sourced color-matched 304 PVD Black Titanium Hairline stainless steel sheets from Sanmei Metal for the back panels of its premium speakers.
Lokasi
Amerika Serikat
Bahan
baja tahan karat 304
Menyelesaikan
PVD Black Titanium, hairline
Aplikasi
Speaker back panels
black stainless steel speaker back panel
Concept rendering: PVD Black Titanium Hairline stainless steel speaker back panel.

Gambaran Umum Proyek

A US audio brand needed black stainless steel back panels for a premium speaker line. The brand already had an established supply chain in the US, but needed a black finish that matched its existing reference sample exactly.
The 400 × 500 mm panels are laser cut and bent in the client's own facility, so the sheets also had to arrive ready for fabrication, with a decorative surface that would come through cutting and bending undamaged.

Spesifikasi pesanan

Nilai
baja tahan karat 304
Menyelesaikan
PVD Black Titanium, hairline, color-matched to client sample
Lapisan dasar
S26HL-11, tuned to the reference sample
Sheet size
1.5 × 1219 × 1524 mm (approx. 0.059" × 48" × 60")
Finished part
400 × 500 mm back panels, laser cut and bent by the client
Lapisan pelindung
[FILM BRAND + THICKNESS] laser-cutting film

Matching a Black Reference Sample

In premium audio, the back panel is part of the product's identity. "Black" covers a wide range of tones, and a slight shift in undertone or sheen shows immediately when a panel sits next to the rest of the product. The client sent its physical reference sample to Sanmei Metal for matching.
Two steps to an exact match

Start from a standard finish.

Sanmei Metal produces several blacks in-house: PVD Ti-Black, PVD Gun Black, PVD Chrome Black and water-plated black. Compared side by side with the client's sample, our PVD Black Titanium Hairline sheet (S26HL-11) was the closest.

Tune the coating.

Using S26HL-11 as the base, our PVD technicians adjusted the coating time and reactive gas ratio until the color, undertone and sheen matched the reference sample.
Our black hairline finishes
Each finish has a different undertone under strong light. Open any swatch to view details or request a sample.
Lembaran Baja Tahan Karat PVD Hitam Titanium Hairline S26HL-11
Used in this case

Titanium Black S26HL-11

Pemeran ungu
Lihat detailnya
Lembaran Baja Tahan Karat Chrome Hitam dengan Garis Rambut S26HL-24

Chrome Black S26HL-24

Warna hijau kekuningan
Lihat detailnya
Lembaran Baja Tahan Karat S26HL-12 Warna Hitam Gun Black dengan Garis Halus

Gun Black S26HL-12

Abu-abu karbon netral
Lihat detailnya
Water-Plated Black Hairline Stainless Steel Sheet S26HL-14

Water-Plated Black S26HL-14

Hitam pekat dan polos
Lihat detailnya
Starting from a stock finish rather than a blank color makes the match repeatable for every reorder.
Send us your color sampleExplore our black stainless steel

Batch-to-Batch Consistency

Premium audio brands rarely start with a large order. A small trial batch to confirm the color and test market response is a normal first step, and reorders follow once the product sells.
That makes color consistency between batches a brand-image issue: every reorder has to match the panels already on the market. Before each shipment, Sanmei Metal checks the sheets with a colorimeter against the client's approved sample, so every sheet in every batch has the color the client signed off.
Start with a test batch
Mobilisasi LAB di Sanmei Metal
Every batch is checked with a colorimeter against the client's approved sample.

Ready for Laser Cutting and Bending

The client cuts each 1219 × 1524 mm sheet into 400 × 500 mm panels and bends them in its own facility. Standard protective films can lift, bubble or tear back along the cut line, leaving the coated edge unprotected.
Sanmei Metal diterapkan
Polifilm laser-cutting film, which stays bonded through cutting so the PVD surface remains covered right up to the edge, and the coated surface bends cleanly at the fold lines without cracking.
Laser cutting, bending, deep forming and long storage each call for a different film. Tell us how your panels will be processed and we will recommend a suitable one.
Ceritakan proses AndaDetail lapisan pelindung

Ringkasan Proyek

Sending a physical sample is the most reliable way to make sure bulk production matches what you expect. Lighting and screens change how a color looks, so the black a supplier sees and the black a client has in mind are often not the same.

For this project, Sanmei Metal custom-tuned a standard finish to the client’s sample, and supplied a material grade and protective film suited to the client’s own laser cutting and bending.

Choosing stainless steel for speaker parts is not difficult. The details are: a thickness that keeps the panel light without losing rigidity, a color that fits the brand’s positioning, and a grade suited to how the product is made and used.
Ceritakan tentang proyek AndaProduk dalam hal ini
Produk dalam hal ini

PVD Black Titanium Hairline Stainless Steel Sheet

The back panels in this case were made from our PVD Black Titanium Hairline sheet (S26HL-11), color-tuned to the client's reference sample and supplied with laser-cutting film.
Product code
S26HL-11
Nilai dalam kasus ini
304
Menyelesaikan
PVD Black Titanium, hairline
Ukuran dalam hal ini
1.5 × 1219 × 1524 mm
View black sheetsDapatkan penawaran
Berikutnya proyek: Tidak ada

Anda Mungkin Juga Menyukai

Lihat selengkapnya+

Hubungi kami

Pusat Kreasi, Distrik Shunde, Kota Foshan, Provinsi Guangdong, 528315, Tiongkok
+8615015653566 / 0757-87668353
Paige Deng
pemasaran@sanmeimetal.com

    Seret file atau gambar Anda ke sini (opsional)

    atau Jelajahi

    JPG/ PNG/ DWG / PDF / DOCX / ZIP (Maks. 20MB)

    TELP: +8615015653566 / 0757-87668353
    E-mail: pemasaran@sanmeimetal.com

    Markas besar:
    Pusat Pembuatan, No.142, Jalan Yuhe, Kota Lecong, Distrik Shunde, Kota Foshan, Provinsi Guangdong, Tiongkok. 528315

    Pabrik: Liyuan Logistics City, Kota Chencun, Distrik Shunde, Kota Foshan, Provinsi Guangdong, Tiongkok. 528313

    Dapatkan penawaran

    Cantumkan semua ukuran yang Anda butuhkan, masing-masing dengan jenis finishing dan jumlahnya. Pesanan dalam jumlah kecil juga diterima. Kami akan segera membalas melalui email. Anda juga dapat menghubungi kami di marketing@sanmeimetal.com.

    Ukuran, finishing, dan jumlah satu baris per item

      Belum siap mengisi formulir? Cara lain untuk menghubungi kami

      menyeberang

      Bahasa

      Hubungi kami
      1
      Halo! Beri tahu kami produk atau lapisan akhir baja tahan karat apa yang Anda minati — atau beri tahu kami jika Anda ingin memulai dengan sampel. Kami akan segera menghubungi Anda kembali.