← Back to Categories

Product · Wall panels

Stainless Steel Wall Panels & Cladding

Stainless steel wall panels and cladding for kitchens, bathrooms, interiors, elevators and exterior walls, made from steel sourced directly from leading mills. Small orders accepted, fabrication to your drawings, color matched batch to batch, and a Mill Test Report (MTR) with every shipment.
beadblasted wall cladding and cabinet
Overview

What Are Stainless Steel Wall Panels?

Stainless steel wall panels are stainless sheets fixed to a wall to protect and decorate it. Different regions and trades call them by different names: wall panels, wall cladding, wall covering or wall sheets. They all refer to the same product.
Stainless steel resists corrosion, cleans easily and does not absorb water, so it lasts for many years. That is why it is used everywhere from commercial kitchens and bathrooms to hotel lobbies, elevators and building facades.
Choosing a panel comes down to two things: the grade decides where it will stay rust-free, and the finish decides how it looks and how easy it is to maintain.
beadblasted wall cladding

Stainless Steel Wall Panels by Application

Select your application to see the recommended grade and finish.
stainless steel wall panels in a kitchen
01 · Kitchen

Kitchen Walls

Kitchen walls face grease, steam, heat and daily cleaning with strong detergents. The panel needs to wipe clean fast and keep looking the same after years of scrubbing. In a kitchen, grade and finish are a functional choice, not a styling one.
Grades
304 General Use
For kitchen walls that are washed down often or stay damp.
430 Budget Option for Dry Walls
Lower cost. Expands less with heat than 304, so panels stay flatter near cooking equipment. Not for walls that stay wet.
441 Walls Near High Heat
For wall panels behind ranges, fryers and grills. Handles heat well and resists corrosion better than 430.
Recommended finishes
For kitchen walls, the best stainless steel finishes are hairline, satin, bead blasted and diamond quilted, because they hide scratches, fingerprints and grease marks and wipe clean easily.
Hairline: Fine straight lines hide light scratches. Wipe along the grain for a streak-free finish.
Satin: Soft, low-sheen surface that hides fingerprints and smudges.
Bead Blasted: Matte, even texture with no reflection, so grease marks and water spots are hard to see.
Diamond Quilted: Hides the scratches, dents and fingerprints that flat sheet shows after a few months of kitchen use, and its soft slopes wipe clean with a damp cloth.
NoteMirror: Not recommended. It shows every fingerprint, splash and scratch.
stainless steel shower wall panels in a bathroom
02 · Bathroom

Bathroom and Shower Walls

Bathrooms stay humid, and many cleaning products contain chlorine. Chlorides are the main cause of rust spots on stainless steel, so wet zones need a higher grade than dry walls.
Grades
304 Dry Areas
For walls away from direct water, such as vanity and toilet areas.
316L Showers & Wet Zones
Contains molybdenum, which gives better resistance to chlorides in water and cleaners.
Recommended finishes
The best finishes for stainless steel bathroom and shower wall panels are hairline, satin and bead blasted, because they hide water spots and fingerprints and dry without obvious streaks.
Hairline: Straight grain hides light scratches and dries without obvious streaks.
Satin: Low sheen that hides water spots and fingerprints.
Bead Blasted: Matte texture that keeps water marks out of sight.
NoteMirror: Not recommended. Water spots and soap residue show clearly on a reflective surface.
champagne-gold-hairline-sheet-gallery-corridor-framed-art-wall
03 · Interior

Interior Feature Walls

Lobbies, restaurants, hotels, shopping malls and other busy interiors use stainless steel wall cladding as a design feature. Any finish works here, from PVD colors to etched and embossed patterns. The main concern is foot traffic: lower walls get touched by hands and brushed by bags and carts, so choose finishes for that height carefully.
Grades
201 Budget Option for Dry Interiors
Lower nickel content and lower cost. Fine for dry indoor walls. Avoid humid or coastal spaces and areas cleaned with strong chemicals.
304 General Use
For high-end projects, or interiors with moisture and frequent cleaning.
Recommended finishes
For decorative interior wall cladding, hairline and etched finishes suit large wall areas, while water ripple and hammered finishes create bold feature walls that draw the eye.
Hairline: Brushed texture that hides daily wear on large wall areas.
Etched: Patterns etched into the surface for feature walls and accent walls.
Water Ripple: Stamped 3D ripples turn lighting into moving reflections, a favorite for lobby and restaurant feature walls.
Hammered: Hammered dimples add handcrafted depth to bars, restaurants and themed interiors, and hide scratches on walls people touch.
NoteMirror: Use on upper walls, columns and accent strips. Avoid it below waist height in busy areas, where fingerprints and scratches show first.
stainless steel elevator wall panels
04 · Elevator

Elevator Cabs

Elevator cabs are small and carry heavy traffic every day. Passengers touch the walls, and carts and luggage scrape the lower panels. Many projects mix finishes: decorative upper walls and harder-wearing lower walls.
Grades
201 Budget Option
For cab walls in dry indoor buildings.
304 General Use
The standard grade for elevator cab walls.
Recommended finishes
For elevator cab walls, hairline, etched and vibration stainless steel finishes are the most common choices, because they look premium and hide scratches in a busy cab.
Hairline: Brushed finish for a clean, premium cab interior.
Etched: Patterned panels for feature walls.
Vibration: Random swirl texture that hides scratches well in high-traffic cabs.
NoteMirror: Makes a small cab feel larger. Use it on upper cab walls, with an anti-fingerprint coating. For lower walls, choose hairline, vibration or etched, since they take the most contact.
aged copper stainless steel wall facade
05 · Exterior

Exterior Facades

Exterior cladding faces rain, sun, airborne salt and pollution for decades. The right grade depends on where the building is, whether the panels will be welded, and how much strength the design needs.
Grades
304 Inland
For buildings away from the coast and heavy industry.
316 Coastal & Industrial
Better resistance to salt air and polluted environments.
304L / 316L Welded Assemblies
"L" means low carbon. During welding, low carbon prevents corrosion from starting along the weld line. Choose an L grade whenever panels are welded.
2205 / 2507 High Strength & Severe Environments
Duplex grades with about twice the strength of 304, plus excellent resistance to salt and chlorides. For large spans, high wind loads or thinner panels that still need to stay rigid.
Recommended finishes
For building facades, hairline and bead blasted stainless steel finishes work best on large areas because they keep glare low, while water ripple suits feature facades and entrance walls.
Hairline: Clean, classic facade finish with soft reflection.
Bead Blasted: Matte surface with no glare, and it hides minor waviness in large panels.
Water Ripple: Ripples catch daylight and shift with the viewing angle, for feature facades and entrance walls.
Outdoor protective oil: Can be added to PVD color, hairline and mirror surfaces to extend the life of the surface.
NoteMirror: Use only for small accents or signage. On large facade areas it causes glare for neighbors and traffic, and it makes any panel unevenness obvious.
For every application
Anti-fingerprint coating: Recommended for kitchens, bathrooms and elevators, and for any wall within reach in interiors and on facades. Fingerprints and grease wipe off easily, and daily maintenance costs stay low.
Color: Every finish above can be PVD coated in gold, black, bronze and more.
Finishes
Every finish recommended on the left. Tap one to see its colors and request samples.

Not sure which grade fits your project?

Our engineers review your application and drawings and recommend a grade and finish.

Stainless Steel Wall Panel Colors

PVD colors are coated in-house by vacuum coating and can be combined with hairline, bead blasted, mirror, etched and embossed finishes. For color-matched orders, every batch is checked with a colorimeter against your approved sample, and its LAB values are recorded so reorders match.
Every color comes in the finishes shown above.
See all colors and finishes →

Good Wall Panels Start With Good Steel

A stainless steel wall panel is only as good as the steel underneath. Sanmei Metal sources directly from leading mills such as TISCO, Baosteel and POSCO, and every batch can be traced back to the mill.

Mill-direct sheet

Sourced straight from leading mills, so quality stays consistent from the first panel to the last batch.

The right grade

304 as standard, 316L for showers and coastal walls, 201 and 430 for dry interiors on a budget. We recommend the grade for your environment.

Documented

A Mill Test Report with every shipment. SGS and RoHS testing on request.

Checked before shipment

Surface, thickness, composition and dimensions are inspected on every order.
Certificates and test reports
Third-party tests are run by a laboratory with IAS / ISO 17025 accreditation, a credential widely recognized by US buyers.
Know more about our resources?
Top stainless steel mills in China
Luxury Corner Suite Featuring a Shimmering Water Ripple Embossed Stainless Steel Pattern Wall

Stainless Steel Wall Cladding Projects

From kitchens and bathrooms to hotel lobbies, elevators and facades, see how our stainless steel wall panels look once installed.

Stainless Steel Wall Panel Sizes & Thickness

Below are common stainless steel wall panel sizes and the theoretical weight for each thickness. 4x8 (1219 × 2438 mm) and 4x10 (1219 × 3048 mm) are the most common standard sizes; other sizes are available on request.

Standard sizes

4x8
1219 × 2438 mm (4' × 8')
4x10
1219 × 3048 mm (4' × 10')
1×2 m
1000 × 2000 mm (approx. 39" × 79")
1.5×3 m
1500 × 3000 mm (approx. 59" × 118")
Other sizes
On request

Thickness and theoretical weight

0.5 mm
~4.0 kg/m²
0.6 mm
~4.8 kg/m²
0.8 mm
~6.4 kg/m²
1.0 mm
~8.0 kg/m²
1.2 mm
~9.6 kg/m²
1.5 mm
~12.0 kg/m²
2.0 mm
~16.0 kg/m²
We recommend 0.5–2.0 mm for decorative wall panels. Thicker sheet adds weight without adding anything to the look, so it rarely suits decorative walls. Weights are theoretical, based on a stainless steel density of about 8.0 g/cm³, for the sheet only, excluding substrate, backing and fixings.

Wall Panel Fabrication

Sanmei Metal does more than supply sheets. We can fabricate your wall panels to your drawings before shipping, so you spend less time coordinating between material sourcing and fabrication.

Laser Cutting

Panels and custom shapes cut to your drawings.

Bending & Edge Folding

Folded edges add rigidity and make installation and edge finishing easier.

Cassette Panels

Panels with all four edges folded, common on exterior walls.

Holes & Cutouts

Openings for outlets, switches, pipes and fixings.

Composite Backing

Honeycomb and other backing boards keep large panels flat.

Trims & Accessories

L and J trims, corners, joining strips and end caps.

Welding

For welded exterior assemblies, choose an L grade (see Applications).
Drawing review: Our engineers check your drawings and specifications to confirm the panels can be fabricated and installed before production starts.
stainless steel filming
Protective film

Packaging

Each project needs a different protective film, so we choose the film based on how the panels will be processed and installed.
Standard: PE protective film, packed in wooden crates or on wooden pallets.
Laser cutting later: Laser film, which stays in place and does not lift or burn during cutting.
Concerned about adhesive residue: Low-tack protective film.
Exterior projects: Remove the film soon after installation to avoid residue from long sun exposure.

Stainless Steel Wall Panels FAQ

What is the difference between wall panels, cladding and covering?

They are the same product. "Wall panels" is common in the US, "cladding" in the UK and Australia, and "covering" and "sheets" are also widely used.

Should I choose 304 or 316 for wall panels?

304 is enough for most indoor walls. For showers, coastal buildings and industrial areas, choose 316 or 316L, which resists chlorides and salt better.

Can stainless steel wall panels be used behind a stove?

Yes. Choose 441 for walls right behind ranges and grills; 430 works for dry walls nearby. Both expand less with heat than 304, so the panels are less likely to warp.

How do I clean stainless steel wall panels?

Use warm water and a mild detergent, and wipe along the grain. Avoid steel wool and abrasive cleaners. Panels with anti-fingerprint coating only need a damp cloth for daily cleaning.

How are stainless steel wall panels installed?

Indoor panels are usually bonded to a substrate board with adhesive, with trims at joints and edges. Exterior cladding is usually mounted on a frame as cassette panels or with mechanical fixings.

Do you accept small orders? Can I get samples first?

Yes. We accept small orders and can send samples so you can confirm the color and finish first.

Can you provide material certificates?

Every shipment comes with a Mill Test Report (MTR). SGS test reports are available on request.

Why project buyers work with Sanmei Metal

Material-driven, engineering-supported, execution-ready. One supplier from the mill to your site.

An integrated fabrication network in Foshan.

Material, surface processing and fabrication lines within reach of each other, coordinated as one order.
Material line
Material line
Material line
Surface processing line
Surface processing line
Surface processing line
Fabrication line
Fabrication line
Fabrication line

Documents you can check.

Every order ships with a Mill Test Report traced to its heat number, and SGS testing is available on request. These are real documents from our mill partners and our project work.
Certifications shown belong to Sanmei and its fabrication partners. Click a document to see it full size.

Tell us about your project.

Send a drawing, a reference photo or just the grade and size. Our team replies with material advice, finish options, samples and a quote.
What helps us answer fastest
Drawing, sketch or reference photo
Grade and thickness, if you know them
Finish or color you have in mind
Quantity and delivery location
Tell us about your project →
Samples and small batches are welcome.

Contact us

Creating Center, Shunde District, Foshan City, Guangdong Province, 528315, China

    Drag your files or pictures here (optional)

    or Browse

    JPG/ PNG/ DWG / PDF / DOCX / ZIP (Max. 20MB)

    Headquarters:
    Creating Center, No.142, Yuhe Road, Lecong Town, Shunde District, Foshan City, Guangdong Province, China. 528315

    Factory: Liyuan Logistics City, Chencun Town, Shunde District, Foshan City, Guangdong Province, China. 528313

    Get a quote

    List every size you need, each with its own finish and quantity. Small batches are welcome. We'll reply by email shortly. You can also write to us at marketing@sanmeimetal.com.

    Sanmei Metal is a stainless steel supplier based in Foshan, China. We ship to customers worldwide.

    Sizes, finishes and quantities one line per item

      cross

      Language