• Finish ➔
  • Materials ➔
  • Structural Steel Components ➔
  • Architectural Metal Works ➔
← Back to Categories

Foshan, China. Materials, finishes and fabrication.

Stainless Steel Supplier in China | Top Resources

Coils, sheets, strip and profiles in over 20 grades from leading mills. Decorative finishes and drawing-based fabrication from our own factory in Foshan.
Tell us about your project →Browse finishes
SANMEI METAL
hairline stainless steelsatin stainless steelvibration stainless steelaged stainless steel

Three jobs, one supplier.

Most projects need material, a finish and some fabrication. Buying them from three places means three sets of tolerances and three people to chase. We handle all three in one order.
stainless steel coil and sheets factory
Materials

Stainless steel materials

Coils, sheets, precision strip and structural profiles in 200, 300, 400 series and duplex grades, with grade selection advice.
Explore materials
decorative stainless steel saheet
Surface finishes

Color and surface processing

Brushed, polished, embossed or etched, then colored by PVD vacuum coating or water plating under our own process control.
Explore decorative sheets
structrural steel fabricatoin
Fabrication

Project-based fabrication

Profiles, screens, elevator panels and steel structures made to your drawings, reviewed by our engineers for fit and installation.
View fabrication
Decorative stainless steel, 10 finishes in 12 colors

Stainless Steel Sheet for Decoration

By finish
By color
All decorative sheets

Hairline
Texture, brushed in one direction
Hairline
Long continuous grain that turns a highlight into a vertical streak. The base under most of our colored sheets.
20+ PVD Colors — Gold, Rose Gold, Black, Bronze & More
View hairline sheet →
Nickel Silver Hairline Stainless Steel Sheet S26HL-01 (3)hairline stainless steel
No.4
Texture, short satin grain
No.4
A shorter, softer brush than hairline. Light spreads wider and panels read more evenly side by side.
20+ PVD Colors — Gold, Rose Gold, Black, Bronze & More
View No.4 sheet →
Nickel Silver Satin Stianless Steel Sheet S26ST-01 (3)satin stainless steel
Vibration
Texture, non-directional
Vibration
Random swirl marks with no grain direction, so light stays soft from every angle and daily scratches blend in.
20+ PVD Colors — Gold, Rose Gold, Black, Bronze & More
View vibration sheet →
Zinc Gray Vibration Stainless Steel Sheet S26VB-03vibration stainless steel
Antique
Aged color on brushed steel
Antique
The patina of aged brass, bronze and copper on a stainless base, with patina depth adjustable to your sample.
20+ Patterns in aged brozne, brass and copper
View antique sheet→
Aged Brass Erosion Pattern Stainless Steel Sheet S26VT-48aged stainless steel
Blasted
Texture, short satin grain
Blasted
Sanmei Metal offers two blasted matte finishes for stainless steel — bead blasted for a fine, even texture, sand blasted for a coarser, heavy-coverage surface.
20+ PVD Colors — Gold, Rose Gold, Black, Bronze & More
View blasted sheet →
Nickel Silver Sandblasted Stainless Steel Sheet S26BB-01 (3)bead blasted stainless steel
Embossed
Pattern, rolled into the sheet
Embossed
2WL, 5WL, 6WL, 7WL/7GM, 7DL and 15DP, and the rolled embossed finishes are Diamond Quilted, Mosaic Diamond, Linen, Fabric, Wood Grain, Basket Weave and Stripe Line.
20+ Patterns in different colors
View embossed sheet→
Embossed Mosaic Diamond Stainless Steel Sheetembossed stainless steel
Mirrored
Polished to 8K–12K in-house
Mirrored
Most suppliers stop at 8K. We polish to 10K–12K in our own processing center, then color it or pattern it.
20+ PVD Colors — Gold, Rose Gold, Black, Bronze & More
View mirror sheet→
Zinc Gray Mirror Stainless Steel Sheet S26MR-03mirrored stainless steel
Hammered
Pattern, six hammer styles
Hammered
Meteorite, Honeycomb, Tortoise Shell, Bush Hammered, Reverse Hammered, and classic Dot Hammered
20+ PVD Colors — Gold, Rose Gold, Black, Bronze & More
View hammered sheet→
sliver embossed hammered stainless steel sheethammered stainless steel
Laminated
Decorative film on steel
Laminated
Wood, stone and printed looks bonded to stainless steel, for designs a coating alone cannot reach.

View laminated sheet →
laminated stainless steel
Water Ripple
Irregular, organic water surface — no repeat
Water Ripple
Available in small, medium, and deep ripples, with over 10 colors including silver, black, blue, and orange.

View water ripple sheet →
water ripple stainless steel sheet embossed pattred stainless steelwater ripple stainless steel sheet
Nickel Silver
Natural stainless
Nickel Silver
Our nickel silver stainless steel is PVD-coated with a nickel base, giving it a brighter, more silver tone than standard mill-finish stainless steel.
Available on hairline, satin, vibration, mirror and more.
View nickel silver sheets →
Nickel Silver Satin Stianless Steel Sheet S26ST-01 (3)silver stainless steel panel used in kitchen cabinet
Champagne Gold
PVD Color
Champagne Gold
A pale, soft gold that sits between silver and gold. Quieter on large wall areas and easy to pair with stone and wood.
Available on hairline, satin, vibration, mirror and more.
View champagne gold sheets →
Champagne Gold Satin Stianless Steel Sheet S26ST-04Champagne gold stainless steel panel used in kitchen cabinet
Rose Gold
PVD Color
Rose Gold
Gold with a pink cast, popular for retail interiors, elevator cabs and feature trims.
Available on hairline, satin, vibration, mirror and more.
View rose gold sheets →
Rose Gold Satin Stainless Steel Sheet S26ST-19rose gold stainless steel panel used in kitchen cabinet
Bronze
PVD Color
Bronze
Three tones of bronze. Bronze, deep bronze and bronze gold.
Available on hairline, satin, vibration, mirror and more.
View bronze sheets →
Deep Bronze Hairline Stainless Steel Sheet S26HL-09Bronze stainless steel panel used on wall
Black
PVD Color
Black
Three tones of black. Chrome black, ti balck, gun black adn water plating black.
Available on hairline, satin, vibration, mirror and more.
View black sheets →
Chrome Black Satin Stainless Steel Sheet S26ST-20black mirror stainless steel wall panel
Copper
PVD Color
Copper
Red-brown copper tones.
Available on hairline, satin, vibration, mirror and more.
View copper sheets →
no4 copper stainless steel sheet (2)Copper color stainless steel wall panel
Ti gold and yellow gold
PVD Color
Ti gold and yellow gold
 a warm gold tone with a subtle olive undertone and a brightest, most classic gold
Available on hairline, satin, vibration, mirror and more.
View ti gold and yellow gold sheets →
Ti-gold Satin Stianless Steel Sheet S26ST-06ti gold stainless steel wall panel
Brass
PVD Color
Brass
Brass colored stainless steel sheet pairs the warmth of a classic brass finish with the durability of stainless
Available on hairline, satin, vibration, mirror and more.
View brass sheets →
Brass Vibration Stainless Steel Sheet S26VB-18brushed brass hairline stainless steel metal kitchen cabinet2
Aged Brass

Aged Brass
Aged brass stainless steel replicates the weathered, oxidized look that brass develops over years of exposure

View aged brass sheets →
Aged Brass Erosion Pattern Stainless Steel Sheet S26VT-48aged brass stainless steel backsplash in kitchen
Antique Bronze

Antique Bronze
Aged bronze stainless steel captures the darkened, weathered character bronze takes on with age

View antique bronze sheets →
Antique Bronze Ore Rock Stainless Steel Sheet S26VT-53aged bronze stainless steel table
Aged Copper

Aged Copper
Antique copper stainless steel reproduces the deep, reddish-brown patina copper develops with age

View aged copper sheets →
Antique Copper Etched Stainless Steel Sheet S26VT-72aged copper stainless steel wall facade
Green Copper

Green Copper
Green copper stainless steel reproduces verdigris — the blue-green patina copper develops after long-term oxidation, the same effect seen on aged copper roofing and statuary.

View aged copper sheets →
Green Copper with Gold Vintage Stainless Steel Sheet S26VT-77Green Copper Stainless Steel Cabinet

Stainless steel materials, by form and grade.

Stock forms for fabrication and project use. Tell us the application and we will suggest the grade, thickness and finish that fit it, not just the one we have most of.

Architectural metal works, made to your drawings.

Because we finish and fabricate in-house, we can take responsibility for a component from bare sheet to installed panel, with one point of contact.
etched stainless steel elevator panel1

Elevator panel systems

Car panels and landing panels, fabricated for consistency and system fit.
stainless steel room divider

Metal screening

Stainless steel screens and room dividers for spatial division and architectural expression.
Luxury Hotel Column with Integrated Lighting and a Water Ripple Embossed Stainless Steel Pattern

Metal ceiling

Water ripple panels for hospitality, retail and lobby ceilings.
Also made to drawing:
Project-based profilesAll metal works
Know about how we work out
Project-based Fabrication

How a project runs with us.

Engineering support sits between material selection and production, so what gets specified is what can be made and installed.
1

Send the drawing

Or a sketch, a photo, a grade and size. Our engineers check it for material and fabrication fit.
2

Agree grade and finish

We recommend grade, thickness and finish for the application, and send samples when color matters.
3

Process and fabricate

Cutting, surface finishing, coloring and fabrication are coordinated in one production plan.
4

Documents and delivery

Required reports go with the goods, packed for export and site handling.
Send your drawing
A PDF, CAD file, sketch or site photo is enough to start.

Engineering-Oriented Services

Engineering support is provided to bridge material selection, drawing verification, and fabrication readiness.

Raw Material Supply

stainless-steel-sheet

Stainless steel and carbon steel material supply aligned with project and fabrication requirements.

Explore Our Materials

Surface Finishing & Coloring

bronze mirror finish stainless steel

In-house PVD coating and water plating for consistent, wear-resistant color finishes — from black and bronze to rose gold, alongside texture processes like hairline, mirror, and embossing.

Explore Our Decorative Finish

Engineering Product Fabrication

steel structure fabrication hub

Project-based fabrication covering stainless steel profiles, architectural metal works, and related engineered components — coordinated from drawings to finished delivery.

Engineering Drawing Support

steel structure drawing development

Engineering support to review and refine project drawings, ensuring profiles and metal components are fabrication-ready and installable.

Consulting Expert

Project Applications

From stainless steel materials to project-based profiles and architectural metal works, applied across a wide range of industrial and architectural environments.

Traceable Sources. Verified Fabrication.

We maintain strict control over material traceability and fabrication accountability, supported by mill test reports, processing records, and qualification certificates from approved material suppliers, fabrication partners, and construction-related entities.

All materials and processes are managed under recognized quality and compliance systems to meet project-specific and international standards.

TiN PVD Data Sheet-Sanmei Metal_01
TiN PVD Data Sheet-Sanmei Metal_02
TiN PVD Data Sheet-Sanmei Metal_02
TiN PVD Data Sheet-Sanmei Metal_02
SGS from the mill
SGS from the mill
SGS from the mill
SGS from the mill
mill test report
Mill Test Report
mill test report
Mill Test Report
mill test report
Mill Test Report
Mill Test Report
Mill Test Report

Why Choose Sanmei Metal

Material-Driven. Engineering-Supported. Execution-Ready.
Material-First Stainless Steel Expertise

Deeply rooted in stainless steel materials.
With over 10 years of focus on coils, sheets, profiles, and finishes, we control grade selection, surface consistency, and batch stability from the source.

Verified Material Sources & Traceability

Material quality starts at the source.
We work with verified mills and processors in Foshan to ensure traceable supply, consistent chemistry, and reliable performance across projects.

Engineering Support Built on Material Understanding

Engineering support built on material understanding.
Our engineers review drawings and specifications to ensure profiles and components are manufacturable with the selected materials.

Integrated Processing & Project Coordination

Coordinated processing — not fragmented outsourcing.
Material processing, fabrication, and finishing are aligned to ensure what is specified can be delivered and installed as intended.

Stainless Steel is Everywhere

Stainless Steel is an indispensable material across a wide spectrum of industries, from food processing and medical equipment to household goods, construction, and industrial applications.

Food Grade Stainless Steel
Learn More
Medical Grade Stainless Steel
Learn More
Sanitary Stainless Steel
Learn More
Construction Stainless Steel
Learn More
Industrial Stainless Steel
Learn More

Latest Information

Nickel

$ per ton
Aluminum

$ per ton
Copper

$ per ton
Zinc

$ per ton
27-Oct-2022 Nickel

20000.50

20.00
27-Oct-2022 Nickel

3500.50

20.00
27-Oct-2022 Nickel

5900.00

20.00
27-Oct-2022 Nickel

12500.50

20.00

Contact us

Creating Center, Shunde District, Foshan City, Guangdong Province, 528315, China
+8615015653566 / 0757-87668353
Paige Deng
marketing@sanmeimetal.com

    Drag your files or pictures here

    or Browse

    JPG / PNG /DWG / PDF / DOCX / ZIP (Max. 20MB)

    TEL: +8615015653566 / 0757-87668353
    Email: marketing@sanmeimetal.com

    Headquarters:
    Creating Center, No.142, Yuhe Road, Lecong Town, Shunde District, Foshan City, Guangdong Province, China. 528315

    Factory: Liyuan Logistics City, Chencun Town, Shunde District, Foshan City, Guangdong Province, China. 528313

    cross

    Language

    Contact Us
    1
    Hello! Tell us what stainless steel product or finish you're interested in — or let us know if you'd like to start with a sample. We'll get back to you shortly.