← Back to Categories

Antiqued Mirror Panels in Stainless Steel

Antiqued mirror panels in stainless steel give the smoky, time-worn look of an old antique mirror, made on metal instead of glass. A controlled chemical reaction etches patina into a mirror-polished surface, leaving soft reflection between patches of brass, copper, bronze, green copper or silver patina. The base material is stainless steel, so the panels are light, shatterproof and can be cut and bent on site. We supply this finish across grades 201, 304, 316 and 430.

How the Antiqued Mirror Effect Is Made

The process starts with a mirror-polished stainless steel sheet. A reactive solution is then applied to the mirror surface, and the chemical reaction corrodes it in irregular patches, speckles and blooms. Where the reaction acts, the surface turns to patina; where it does not, the bright mirror stays. The patina is then colored to brass, copper, bronze or green copper, while silver styles keep the natural tone of the steel.

How far the reaction is taken sets the final character. A light reaction leaves most of the mirror clear, with fine speckles fading out from one edge. A heavier one covers the whole sheet in cloud-like or marble-like patina, with only glimpses of reflection between. Because the pattern comes from a reaction rather than a printed design, every panel is one of a kind.

antique mirror panles

Get a quote now

    Antiqued Mirror Panel Styles

    Our antiqued mirror panels fall into three pattern families. Choose by how much clear mirror you want to keep, then by color.

    Speckle Fade & Haze — Clear Mirror Kept

    A band of patina along one edge breaks into fine speckles and fades into clean mirror, so most of the panel still reflects. Hang it with the patina at the top or the bottom, depending on where you want the reflection. 5 finishes.

    Bookmatched — Symmetrical Patina Across the Whole Panel

    The patina mirrors left and right like bookmatched marble, so one panel reads as a complete design. Reflection shows only between the patches, which makes these the strongest choice for a feature wall. 8 finishes.

    Silver — Closest to Antique Glass Mirror

    Patina on the natural silver-grey of stainless steel, with no added color. This is the look most people picture when they think of an old antique mirror. 4 finishes.
    Click a finish to see it larger and request that exact sample.

    Product Details

    Design & Patterns
    Sizes & Grades
    Antique Finish Stainless Steel Sheets
    See more antique finishes: Brass, Copper, Bronze & Copper Green →
    Explore ALL Aged Finish→

    Standard Sizes & Thickness

    Panel Thickness
    0.3mm – 3.0mm (30–11 Gauge)
    Recommended Decorative Range
    0.5mm – 2.0mm
    Metric Sizes (Width x Length)
    1000x2000, 1219x2438, 1219x3048, 1500x3000 mm
    Imperial Sizes (Width x Length)
    3.28x6.56, 4.00x8.00, 4.00x10.00, 4.92x9.84 ft
    Custom Sizing
    Cut to size from your drawings, with panel layout planning

    Material & Processing Data

    Substrate Options

    AISI 201, 304, 316, 430

    Surface
    Mirror with chemically etched patina
    Patina Process

    Chemical reaction on a mirror-polished base

    Fabrication
    Bending and laser cutting without peeling or discoloring
    Outdoor Use
    Yes, with an outdoor protective coating
    Standard Lead Time
    7–10 Days (In Stock) / 25–30 Days (Custom)
    Forward / Bulk Orders
    30–45 Days
    Request for Samples

    Cut to Size & Panel Layout Planning

    Every antiqued mirror panel is cut to your project's dimensions. Because each panel carries its own pattern, we plan the layout before cutting: we map the panels to your drawings so the patina flows across joints and the finished wall reads as one surface, not a row of unrelated sheets.

    Start Your Project

    Application

    Antiqued mirror panels open up a room the way a mirror does, but the patina softens the reflection and adds age, so the wall reads as a material rather than a plain mirror. In stainless steel they also go where glass mirror is a risk: on surfaces people touch, knock or lean against.

    Wall & Feature Applications:

    • Grid mirror feature walls
    • Dining room and lounge walls
    • Hotel lobby and reception walls
    • Framed feature mirrors
    • Columns and curved walls

    Hospitality & Commercial Applications:

    • Bar fronts and back bars
    • Elevator car walls and doors
    • Boutique display walls and fitting rooms
    • Cabinet and wardrobe door panels
    • Ceiling panels

    Our antiqued mirror panels can be bent and laser cut without peeling or discoloring the patina. For outdoor or semi-outdoor areas, we add an outdoor protective coating.

    Tell Us Your Project
    antique mirror panels
    aged bronze stainless steel table

    See Aged Metal Finish in Real Projects

    From feature walls to ceilings and cabinetry — see how our aged metal finishes look once installed.
    View Project Cases →

    Need a Clear Mirror Without the Patina?

    See our mirror stainless steel sheets, polished in-house up to 10K–12K.
    View mirror sheets →
    polished mirrored stainless steel ceiling for dining room
    Process

    About the Antiqued Mirror Process

    An antique glass mirror gets its look when the silver backing behind the glass breaks down. On stainless steel, the same effect is created directly on the metal surface, which is why our antiqued mirror panels have no backing to deteriorate and no glass to break.
    Our production process
    01

    Mirror polish

    Start with the customer's specified stainless steel grade (201 / 304 / 316 / 430) and polish it to a mirror finish
    02

    Etch the patina

    Apply a reactive solution to the mirror surface, so the chemical reaction etches the patina pattern into it
    03

    Color

    Color the patina to brass, copper, bronze or green copper; silver styles keep the steel's natural tone
    04

    Seal

    Seal the surface to lock in the patina

    Antiqued Mirror Panels: Stainless Steel vs Glass

    Stainless steel
    Antique glass mirror
    Weight
    About 7.9 kg/m² at 1.0 mm
    About 12.5 kg/m² at 5 mm
    Breakage
    Does not shatter
    Can crack or shatter on impact
    Shaping
    Can be bent and laser cut on curves
    Flat only
    Damp areas
    No silver backing to break down
    Backing can blacken at the edges over time
    Outdoor use
    Yes, with an outdoor protective coating
    Not recommended
    Reflection
    Softer, slightly darker
    Sharper, clearer
    If you need a crisp, glass-clear reflection, glass is still the better choice. For walls people touch, curved surfaces, lifts and bars, stainless steel is the safer material.
    FAQ

    FAQs

    Are antiqued mirror panels made of glass?

    No. These panels are stainless steel (201/304/316/430). The mirror is a polished metal surface, and the antique effect is etched into it by a chemical reaction. You get the antique mirror look with the strength and corrosion resistance of stainless steel.

    Can the panels be bent or laser cut?

    Yes. The panels can be bent and laser cut without the patina peeling or changing color, so they can wrap columns, follow curves or be cut into shapes.

    Can antiqued mirror panels be used outdoors?

    Yes, with an outdoor protective coating. Tell us the panels are for an outdoor or semi-outdoor area and we will include it in your order.

    How do you keep the pattern looking right across a large wall?

    Every panel has its own pattern, so we plan the layout before cutting. We map the panels to your project drawings so the patina flows across the joints and the wall reads as one surface.

    How are antiqued mirror panels installed?

    They can be installed with screw fixing or adhesive bonding, depending on the application. Handle them with clean gloves and keep the protective film on until installation is finished. Contact our team for help with installation methods or sizing.

    How do I clean antiqued mirror panels?

    Wipe with warm soapy water and a microfiber cloth. Avoid abrasive pads, bleach and acid cleaners, which can damage the patina.

    Why project buyers work with Sanmei Metal

    Material-driven, engineering-supported, execution-ready. One supplier from the mill to your site.

    An integrated fabrication network in Foshan.

    Material, surface processing and fabrication lines within reach of each other, coordinated as one order.
    Material line
    Material line
    Material line
    Surface processing line
    Surface processing line
    Surface processing line
    Fabrication line
    Fabrication line
    Fabrication line

    Documents you can check.

    Every order ships with a Mill Test Report traced to its heat number, and SGS testing is available on request. These are real documents from our mill partners and our project work.
    Certifications shown belong to Sanmei and its fabrication partners. Click a document to see it full size.

    Tell us about your project.

    Send a drawing, a reference photo or just the grade and size. Our team replies with material advice, finish options, samples and a quote.
    What helps us answer fastest
    Drawing, sketch or reference photo
    Grade and thickness, if you know them
    Finish or color you have in mind
    Quantity and delivery location
    Tell us about your project →
    Samples and small batches are welcome.

    Contact us

    Creating Center, Shunde District, Foshan City, Guangdong Province, 528315, China

      Drag your files or pictures here (optional)

      or Browse

      JPG/ PNG/ DWG / PDF / DOCX / ZIP (Max. 20MB)

      Headquarters:
      Creating Center, No.142, Yuhe Road, Lecong Town, Shunde District, Foshan City, Guangdong Province, China. 528315

      Factory: Liyuan Logistics City, Chencun Town, Shunde District, Foshan City, Guangdong Province, China. 528313

      Get a quote

      List every size you need, each with its own finish and quantity. Small batches are welcome. We'll reply by email shortly. You can also write to us at marketing@sanmeimetal.com.

      Sanmei Metal is a stainless steel supplier based in Foshan, China. We ship to customers worldwide.

      Sizes, finishes and quantities one line per item

        crosschevron-left

        Language