• Finish ➔
  • Materials ➔
  • Structural Steel Components ➔
  • Architectural Metal Works ➔
← Back to Categories

Elevator panels · Cladding · Interiors · Doors

Stainless Steel Elevator Panels, Doors, Cladding & Interiors

Stainless steel elevator panels and cladding for doors, cabs and landings, in 100+ decorative finishes. Need the whole cabin? We combine stainless steel with marble, wood, aluminum or glass into complete elevator interiors.
Components
Doors, cab walls, ceilings, landing cladding, handrails
Grades
304 standard · 201 and 400 series by budget
Finishes
No.4, bead blasted, mirror, embossed, etched, PVD and more
Combined with
Marble, wood, aluminum, glass
Quality check
Surface, thickness, composition, dimensions
Install support
Manuals and videos with every order
Get a quoteSee finishes
etched stainless steel elevator panel

Elevator panels and cladding.

Elevator makers build doors and cabs from our sheet. Interior contractors mount our panels over the existing surface. Find your part below.
For elevator makers

Sheet for elevator cab interior panels and doors

A stainless steel elevator panel is only as good as the sheet it is formed from. We supply it straight from leading mills, in the grade and size your design needs, with the papers to prove it. Samples and small batches are welcome.
Mill-direct from TISCO, Baosteel, POSCO and Jisco, so the sheet stays consistent from the first door to the last batch.
Grades for every budget: 304 and 316 for most cabs, 201 and 430 when cost comes first.
Mill Test Report with every batch, traced to its heat number. SGS testing on request.
1219 × 2438 to 1500 × 3000 mm, 0.3–3.0 mm thick, with larger sizes on request.
Fabrication in-house: laser cutting, bending and welding to your drawing, which our engineers review before production.
Send us your door drawingSee our mill partners
stainless steel sheet for elevator door and cab panels
Base sheet sourced from these mills:
For interior and renovation contractors

Elevator cladding over existing surfaces

Not keen on the factory finish of a new elevator, or renovating an old one? Panels mount over the existing surface, with no need to remove it. Old panels can also be replaced with new ones.
elevator stainless steel panel
Cab and doors

Elevator cab and door cladding

Thin, light panels fixed over the existing cab walls and car doors. The doors keep their clearance and the cab keeps its rated load.
Landing

Elevator landing cladding

Landing doors, door frames and the surrounding wall on every floor. The first thing passengers see, cut to your measured sizes.
stainless steel elevator handrails and trims
Accessories

Handrails & accessories

Handrails and trims that add support for elderly passengers and finish the cabin cleanly.
Planning a full cabin?
Send us your drawing.

100+ decorative finishes.

For elevator doors, cab walls, ceilings and landing cladding. Every finish below comes in more colors and patterns.
See every finish for elevators:
Decorative finish catalog (PDF)
Beyond panels

Complete elevator interiors.

Panels are our core product. For clients who need the whole cabin, we integrate stainless steel with other materials into one tailored interior.
Material mix: stainless steel with marble, wood, aluminum or glass.
One design: panel finishes, lighting lines, handrails and ceilings, planned together.
Lightweight panels, so the cabin keeps its rated capacity.
Start your interior projectInterior catalog (PDF)
etched stainless steel elevator panel

Elevator project cases.

Hotels, residential towers and commercial buildings: see how each cabin was specified, finished and installed.
stainless steel elevator cab
stainless steel elevator cab
stainless steel elevator
stainless steel elevator cab
stainless steel elevator cab
stainless steel elevator cab
stainless steel elevator cab
stainless steel elevator
elevator stainless steel panel
View all elevator cases

How to order.

From site photos to installation, one specialist follows your project.

01 · Send your requirements

Photos of the installation area, measurements, capacity needs and style preferences.

02 · Design and 3D rendering

Our designers prepare a design proposal and 3D rendering for you to confirm.

03 · Quote and lead time

Once materials and configuration are confirmed, you get a formal quotation, material list and delivery timeline.

04 · Production and installation

After contract signing we start production. A dedicated specialist follows up until installation is complete.
Every order ships with installation manuals and videos. If needed, our elevator specialists can provide on-site technical assistance.
Tell us about your projectSee fabrication service

Specifications.

Sizes, grades, finishes and service for stainless steel elevator panels and cladding.

Sizes and thickness

Sheet thickness
0.3–3.0 mm (30–11 gauge)
Recommended for cladding
0.5–2.0 mm. Over 2.0 mm is not recommended: heavier panels add cab load and reduce door clearance.
Metric sizes (W × L)
1000 × 2000, 1219 × 2438, 1219 × 3048, 1500 × 3000 mm
Imperial sizes (W × L)
3.28 × 6.56, 4 × 8, 4 × 10, 4.92 × 9.84 ft
Larger or custom sizes
Available on request, cut to your door, cabin and landing dimensions

Material and finishes

Standard grade
304
Budget options
201 and 400 series
Finishes
No.4, bead blasted, mirror, embossed, etched, PVD, laminated, antique, anti-fingerprint
Components
Car and landing doors, cab walls, ceilings, landing cladding, handrails and accessories
Other materials
Marble, wood, aluminum, glass

Quality and service

Inspection
Surface, thickness, composition and dimensions, before shipment
Sizing
Thickness and size matched to your door, cabin and landing dimensions
Design
Design proposal and 3D rendering
Installation
Manuals and videos; on-site assistance if needed
Need a finish or size that is not listed?
Send us your cabin drawingFinish catalog (PDF)

Elevator panel FAQ.

What buyers ask before ordering.

What stainless steel grades are available for elevators?

Mainly 304 stainless steel panels, with 201 and 400 series as options depending on budget and application.
Explore technical details:
201304316316L430

Do you only supply panels, or complete elevator interiors?

Both. Besides stainless steel elevator panels we design complete interiors, combining stainless steel with marble, wood, aluminum and glass.

Are colored elevators made from colored stainless steel or cladding?

Both. Elevator makers often form doors and cab walls directly from colored stainless steel sheet. Interior contractors usually mount elevator cladding over the existing surfaces, on new or old elevators.

Do the original elevator panels need to be removed first?

Usually not. Decorative panels are mounted over the existing cab walls, doors and frames, so the cab structure stays untouched. Ceiling panels are the exception and are normally replaced.

Can you clad an existing elevator instead of replacing it?

Yes. We supply elevator cladding cut to your door, frame and cabin sizes to cover the original surfaces. Choose from 100+ finishes to change the look without replacing the elevator.

What do you need for an elevator panel replacement?

The sizes of your current panels, photos of the cabin and the finish you want. We cut new panels to match, so they fit the existing frames.

How do I make sure the panels install correctly?

Every order comes with installation manuals and videos. If needed, our elevator specialists can provide on-site technical assistance.

Which elevator panel pattern or texture costs the least to maintain?

Any pattern or texture with a nano anti-fingerprint coating. Without it, mirror panels cost the most to maintain, because fingerprints are hard to avoid in a busy elevator. With the coating, every finish is easier to clean and needs less cleaning labor.

Why stainless steel over aluminum or painted steel?

Better durability, corrosion resistance and long-term appearance. If your design calls for other materials, we can integrate marble, aluminum or wood.

Will decorative panels reduce elevator capacity?

No. Our panels are designed to be lightweight, so they add style without reducing cabin capacity.

Can you customize elevator doors and interiors?

Yes. Doors, elevator cab interior panels, landing cladding and handrails are made to your dimensions and design.

How is quality controlled before shipment?

Every order is inspected for surface, thickness, composition and dimensions.

Why project buyers work with Sanmei Metal

Material-driven, engineering-supported, execution-ready. One supplier from the mill to your site.

An integrated fabrication network in Foshan.

Material, surface processing and fabrication lines within reach of each other, coordinated as one order.
Material line
Material line
Material line
Surface processing line
Surface processing line
Surface processing line
Fabrication line
Fabrication line
Fabrication line

Coating that lasts longer, matches and stays clean.

Three things we measure on our own production, each compared with typical market product.
PVD coating

Thicker PVD coating

0.30µm
Typical market coil: 0.21–0.27 µm. Ours is up to 28% thicker.
In plain terms: the coating takes longer to wear through, so the color lasts longer.
See the coating test
Color control

Consistent color

ΔE ≤ 2
Most suppliers give no color tolerance at all. Every coil of ours is held at ΔE 2 or less.
In plain terms: reorder next year or mix batches on one wall, and the panels still match.
See the color data
Anti-fingerprint

Fingerprint-resistant

215solvent rubs
The standard asks for 100 solvent rubs. Typical market anti-fingerprint coating failed at 70; ours lasted 215.
In plain terms: fingerprints wipe off, and the coating holds up to daily cleaning.
See the AF test
Tested to GB/T and ISO standards, with MTR and SGS reports on request.
See all our quality control.

Documents you can check.

Every order ships with a Mill Test Report traced to its heat number, and SGS testing is available on request. These are real documents from our mill partners and our project work.
Certifications shown belong to Sanmei and its fabrication partners. Click a document to see it full size.

Tell us about your project.

Send a drawing, a reference photo or just the grade and size. Our team replies with material advice, finish options, samples and a quote.
What helps us answer fastest
Drawing, sketch or reference photo
Grade and thickness, if you know them
Finish or color you have in mind
Quantity and delivery location
Tell us about your project →
Samples and small batches are welcome.

Contact us

Creating Center, Shunde District, Foshan City, Guangdong Province, 528315, China
+8615015653566 / 0757-87668353
Paige Deng
marketing@sanmeimetal.com

    Drag your files or pictures here (optional)

    or Browse

    JPG/ PNG/ DWG / PDF / DOCX / ZIP (Max. 20MB)

    TEL: +8615015653566 / 0757-87668353
    Email: marketing@sanmeimetal.com

    Headquarters:
    Creating Center, No.142, Yuhe Road, Lecong Town, Shunde District, Foshan City, Guangdong Province, China. 528315

    Factory: Liyuan Logistics City, Chencun Town, Shunde District, Foshan City, Guangdong Province, China. 528313

    Get a quote

    List every size you need, each with its own finish and quantity. Small batches are welcome. We'll reply by email shortly. You can also write to us at marketing@sanmeimetal.com.

    Sizes, finishes and quantities one line per item

      Not ready to fill a form? Other ways to reach us

      crosschevron-left

      Language

      Contact Us
      1
      Hi from Sanmei Metal, a stainless steel supplier in China. What’s your project?