Cold and hot rolled coil in BA, 2B, No.1, hairline, mirror, and decorative color finishes.
Sanmei provides water ripple stainless steel in three patterns — random, concentric and wave — with adjustable depths, custom sizes, PVD gold & black, 304/316 grades. Made to your drawing, with spec guidance and fabrication support.
Water ripple stainless steel — also called water wave or 3D ripple stainless — is a stamped, textured finish that presses a flowing water-surface pattern into the sheet. What sets it apart from other embossed patterns is how it moves light: the curved relief breaks up reflections into soft, shifting highlights, so a whole wall seems to ripple and flow as you move past it or as the lighting changes. The effect reads as liquid metal — decorative and dynamic — while the surface still hides fingerprints and minor scratches, cuts glare and stiffens the panel.
Water ripple is not one look. We stamp three distinct pattern families, each moving light in its own way:
Soft, all-over shimmer; the most natural "moving water" feel
Large feature walls, ceilings, facades
Focal points of rippling light that draw the eye
Reception backdrops, art walls, statement panels
Directional, flowing light along the wave
Columns, partitions, linear and vertical surfaces
The Random pattern is stamped in three depths, so you can tune how loud the surface reads:
Shallow — quiet. A subtle, calm ripple; gentle diffusion, refined for close-up surfaces.
Medium — balanced. The all-round choice; clear movement without dominating.
Deep — waves stand out. Bold, sculptural relief with strong light-and-shadow for statement walls.
Vertical flowing waves draw the eye upward and make a surface feel taller, so wave ripple is the choice for tall, upright features:
See our dedicated Water Ripple Ceiling page for panel sizes, lighting integration and install guidance.
Concentric ripple stamps rings that radiate outward like a raindrop hitting water, giving the surface a built-in visual center. The rings gather and bend light toward that focal point, so the panel reads as a deliberate feature rather than an all-over texture — ideal for statement surfaces where you want the eye to land.
Custom ripple patterns and depths stamped to your drawing.
The radiating rings give the surface a natural visual center, so concentric ripple works where you want a focal statement:
Wave ripple runs as regular, flowing wave lines in one direction. The parallel waves carry light along their length for a calm, directional flow, and — run vertically — make a surface feel taller. The most orderly of the three, it suits linear and upright features. Custom ripple patterns and depths stamped to your drawing.
Wave ripple is stamped as regular, parallel lines — the most linear-friendly of the three patterns, so it holds alignment cleanly across multi-panel runs. Available in the same three depths and PVD colors as Random ripple; Shallow and Medium are the common picks for columns and partitions where panels are viewed close-up.
Ripple pattern, depth and size stamped to your design — not off-the-shelf.
Send your rendering; we advise on grade, finish, PVD color and pattern alignment.
Sampling, cutting, folding and pre-fabricated panels — ready for clean install.
Contact our technical engineering team for samples, project pricing, or custom fabrication consultations.
Material quality starts at the source. Verified mills and processors in Foshan ensure traceable, consistent supply.
Coloring and processing under one roof. PVD, water plating, and surface finishing — all in-house.
Built on material understanding. Engineers review drawings to ensure profiles are manufacturable.
Coordinated, not fragmented. Processing, fabrication, and finishing aligned end to end.
Base coils come from our TOP partner mills (Lisco, Tisco, Jisco, Posco PZSS, Yongjin, Hongwang) before undergoing surface finishing and coating in-house at our Foshan facility.
Every sheet and coil ships with protective PVC film from Polifilm (Germany) and Novacel (France). Adhesion level is matched to your downstream process — strong enough to stay in place through laser cutting or stamping without gas pressure lifting the film and causing edge blowout, but not so strong that it leaves residue when removed.
Seaworthy packaging using sturdy wooden crates or steel frames to ensure 100% surface perfection upon arrival. Exporting directly to North America, Europe, Middle East, and Southeast Asia.
Water ripple sheets install like other decorative stainless panels — light, workable, and fixed to a flat substrate:
Substrate: fix to a flat, dry backing — plywood, MDF, cement board or a metal sub-frame. A true substrate keeps the ripple plane even.
Adhesive fixing (most interiors): bond flat panels with neutral-cure structural silicone or construction adhesive — clean, fastener-free, ideal for wall cladding and ceilings.
Mechanical fixing (large or removable panels): screws, clips or Z-clips / cassette systems for big surfaces, facades and panels that may need removal.
Pattern alignment: on Random and Wave patterns, align the ripple direction across joined sheets so the surface reads as one continuous flow; we can supply sheets sequenced for this.
Edges & joints: finish with trim, edge-folding or matching profiles; sheets can be cut, folded and CNC-worked to size — order cut-to-size to cut on-site labor.
Protective film: leave the PVC film on through handling and installation, then peel it off.
We recommend installation by a professional fabricator or fit-out contractor. Cut-to-size and pre-fabrication available from our factory.
For a detailed breakdown of seam treatment, lighting setup, and all four installation methods, see our [full installation and design guide].
It's stamped — a deeper form of embossing where matched dies/rollers press the ripple relief into the sheet, so the texture shows on both faces. It belongs to the embossed, textured stainless family.
Random for a natural, all-over "moving water" look on large walls and ceilings; concentric for a focal, raindrop-style statement panel; wave for directional flow on columns and linear surfaces.
Yes. The 3D texture breaks up reflections, so fingerprints, smudges and minor scratches are far less visible than on a flat mirror or satin sheet — a practical benefit in high-traffic areas. If needed, anti-fingerprint paint can also be added to the fingerprint-free process diagram to keep the board as clean as possible
Yes — we stamp custom ripple patterns and depths to your drawing, and cut to size. Small MOQ; project and prototype quantities accepted.
Headquarters:
Creating Center, No.142, Yuhe Road, Lecong Town, Shunde District, Foshan City, Guangdong Province, China. 528315
Factory: Liyuan Logistics City, Chencun Town, Shunde District, Foshan City, Guangdong Province, China. 528313
